[App_rpt-users] Nodes on same server linked, but not repeating audio?

[Bryan Fields]

On 10/31/17 3:20 PM, David KE6UPI wrote:
> Check rpt.conf. Look at [nodes]
> 
> You should have something like this.
> 2081 = radio at 127.0.0.1:4569/2081,NONE
> 2082 = radio at 127.0.0.1:4569/2082,NONE

It's as configured.
40821 = radio at 127.0.0.1:4578/40821,NONE	        ; 224.280
41618 = radio at 127.0.0.1:4578/41618,NONE         ; 443.525
42032 = radio at 127.0.0.1:4578/42032,NONE         ; 927.050


> The 127.0.0.1 is your local server loopback IP address. This keep the
> Internet from going out and back in.
> 
> If that looks good. You can try pinging and/or traceroute to 127.0.0.1 if
> the problem happens again. The problem could be a firewall or ARP. If you
> run Fail2ban whitelist 127.0.0.1.

Lo0 is up.  I really doubt it's this.

root at Itchy:/var/log/asterisk/rpt-audio/41618# ifconfig lo0
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2058417942 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2058417942 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:133746737506 (124.5 GiB)  TX bytes:133746737506 (124.5 GiB)

There is something else afoot here and it's likely inside asterisk/app_rpt. :(




-- 
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net