[App_rpt-users] RTCM Inbound (Eth Rx) packet out of bounds

[Hayden Honeywood]

Tried again today connecting a board from home to controller (remote). Got
the errors again. I increased the buffer values to the same as Tim's and it
just lowered the out of bounds value by 800 or so (15230).

I then changed the master site to home, rebooted and it came good.

Here are my ping results with the remote site as master...

>From Asterisk cmd line -

*Site 1 at controller - connected via Ethernet to same router (Miktrotik
RB2011UiAS-RM)

PING (Mt.Wellington): Packets tx: 100, rx: 100, oos: 0, Avg.: 6.000 ms
PING (Mt.Wellington):  Worst: 6 ms, Best: 6 ms, 100.0% Packets successfully
received (0.0% loss)

Raspbian ping results:
100 packets transmitted, 100 received, 0% packet loss, time 99123ms
rtt min/avg/max/mdev = 0.818/1.430/3.187/0.570 ms


*Site 2 (my house via internet) - connected via Ethernet to a a TPLink
router (only being used a switch - via another Ethernet cable to a 16 port
switch then into main router, then out to internet). EdgeRouter-X is
router.

PING (Grey.Mt): Packets tx: 100, rx: 99, oos: 0, Avg.: 40.859 ms
PING (Grey.Mt):  Worst: 42 ms, Best: 39 ms, 99.0% Packets successfully
received (1.0% loss)

^The above packet loss was the last packet of the sequence was lost^
100 packets transmitted, 100 received, 0% packet loss, time 100140ms
rtt min/avg/max/mdev = 33.283/33.954/35.629/0.459 ms

I could eliminate the TPLink router being use as a switch just in case
there is something strange going on there.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20170919/ba3b021a/attachment.html>