[App_rpt-users] ASL on a VPS/hosted/cloud server

Sat Apr 7 19:52:57 UTC 2018

That's exactly the reason the club I am with uses a VPS to host our one
node. We are a global club and spread out all over the world. We host a hub
on the VPS so that members can connect to it and talk all around. We have
no need to hook it to a radio.

On Sat, Apr 7, 2018 at 1:27 PM, Benjamin Naber <Benjamin at project23d.com>
wrote:

> Forgive the nativity, but what is the point of ASL nodes being hosted
> on a VPS?
>
> For a hub node I understand, and do so myself. However, there is a
> growing number of hub nodes that do not do anything.
>
> I understand a public hosted hub node is great for connecting to with
> the web transceiver and phone portal, but I sure hope this is not going
> to become the norm.
>
> We have a few guys that come onto our system that only use their phone,
> and honestly, I wish they would use a radio instead. For the principle
> of the matter, but also, phones have terrible audio and tend to pick up
> noise that needs not broadcasting.
>
> ~Benjamin, KB9LFZ
>
>
> On Fri, 2018-04-06 at 20:28 -0400, Steve Zingman wrote:
> > You are going to have to figure out how to get the proper kernel
> > headers for your running kernel. One possibility to check is either
> > run aptitude and check if you have any pending upgrades, and if so,
> > is one of them a kernel upgrade. Pretty much the same thin by running
> > apt-get dist-upgrade. Without the proper kernel headers, DAHDI will
> > not build. You do not have to "make" it. once you have the proper
> > kernel headers, you can reinstall dahdi with apt-get install --
> > reinstall asl-dahdi-linux-dkms
> >
> > On 04/06/2018 08:22 PM, Monty wrote:
> > > Reading package lists... Done
> > > Building dependency tree
> > > Reading state information... Done
> > > E: Unable to locate package linux-headers-2.6.32-042stab127.2
> > > E: Couldn't find any package by glob 'linux-headers-2.6.32-
> > > 042stab127.2'
> > > E: Couldn't find any package by regex 'linux-headers-2.6.32-
> > > 042stab127.2'
> > >
> > >
> > >
> > > Monty
> > >
> > > On Fri, Apr 6, 2018 at 5:10 PM, Steve Zingman <szingman at msgstor.com
> > > > wrote:
> > > > Without the proper kernel header, you can't build DAHDI.
> > > > What is the result of "apt-get install linux-headers-`uname -r`
> > > > -y"
> > > >
> > > >
> > > > On 04/06/2018 08:05 PM, Monty wrote:
> > > > > Error from make command: "You do not appear to have the sources
> > > > > for the 2.6.32-042stab127.2 kernel installed" (Sorry I didn't
> > > > > highlight in the initial email.)
> > > > >
> > > > > I have tried this command, per the Readme of Dahdi: make
> > > > > KVERS=4.9.0-6-amd64
> > > > >
> > > > > I do not get any errors, then run:
> > > > >
> > > > > make install KVERS=4.9.0-6-amd64
> > > > >
> > > > > I get "DADHI installed successfully", reboot, and I still get
> > > > > the same error messages in the CLI I listed below.
> > > > >
> > > > >
> > > > >
> > > > > Monty
> > > > >
> > > > > On Fri, Apr 6, 2018 at 4:23 PM, Steve Zingman <szingman at msgstor
> > > > > .com> wrote:
> > > > > > What error did you get?
> > > > > >
> > > > > >
> > > > > > On 04/06/2018 07:15 PM, Monty wrote:
> > > > > > > Hello All,
> > > > > > >
> > > > > > > I'm trying to install the allstarlink package on my Debian
> > > > > > > VPS.  I followed the instructions on the wiki:
> > > > > > >
> > > > > > > cd /tmp
> > > > > > > wget https://github.com/AllStarLink/Asterisk/raw/develop/al
> > > > > > > lstar/repository/install-repository
> > > > > > > chmod +x install-repository
> > > > > > > ./install-repository
> > > > > > >
> > > > > > > If Raspbian: apt-get install raspberrypi-kernel-headers -y
> > > > > > >
> > > > > > > Otherwise: apt-get install linux-headers-`uname -r` -y
> > > > > > >
> > > > > > > apt-get update
> > > > > > > apt-get install allstarlink -y
> > > > > > > I did get an error on the linux-headers command.  I
> > > > > > > installed what I believe is the latest headers from apt-get
> > > > > > > (4.9.0-6-amd64).
> > > > > > >
> > > > > > > Asterisk is not able to run, and I'm getting the following
> > > > > > > messages in the CLI when I run asterisk manually:
> > > > > > >
> > > > > > > [Apr  6 16:05:35] WARNING[14976]: app_rpt.c:22240
> > > > > > > rpt_master: rpt_thread restarted on node 28615
> > > > > > > [Apr  6 16:05:35] WARNING[15001]: chan_dahdi.c:928
> > > > > > > dahdi_open: Unable to open '/dev/dahdi/pseudo': No such
> > > > > > > file or directory
> > > > > > > [Apr  6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup:
> > > > > > > Unable to dup channel: No such file or directory
> > > > > > >
> > > > > > > Seems to be dahdi is missing.  Any ideas how to remedy?
> > > > > > >
> > > > > > > I have tried to recompile Dahdi from:
> > > > > > >
> > > > > > > http://wiki.allstarlink.org/wiki/DAHDI_Make
> > > > > > >
> > > > > > > After running the "make" command I get the following:
> > > > > > >
> > > > > > > "You do not appear to have the sources for the 2.6.32-
> > > > > > > 042stab127.2 kernel installed."
> > > > > > >
> > > > > > > I can't seem to find how to update/install 2.6.32-
> > > > > > > 042stab127.2 kernel.
> > > > > > >
> > > > > > >
> > > > > > > Monty
> > > > > > > KE7JVX
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > App_rpt-users mailing list
> > > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_r
> > > > > > > pt-users
> > > > > > >
> > > > > > > To unsubscribe from this list please visit http://lists.all
> > > > > > > starlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> > > > > > > scroll down to the bottom of the page. Enter your email
> > > > > > > address and press the "Unsubscribe or edit options button"
> > > > > > > You do not need a password to unsubscribe, you can do it
> > > > > > > via email confirmation. If you have trouble unsubscribing,
> > > > > > > please send a message to the list detailing the problem.
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > App_rpt-users mailing list
> > > > > > App_rpt-users at lists.allstarlink.org
> > > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt
> > > > > > -users
> > > > > >
> > > > > > To unsubscribe from this list please visit http://lists.allst
> > > > > > arlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> > > > > > down to the bottom of the page. Enter your email address and
> > > > > > press the "Unsubscribe or edit options button"
> > > > > > You do not need a password to unsubscribe, you can do it via
> > > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > > send a message to the list detailing the problem.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > App_rpt-users mailing list
> > > > > App_rpt-users at lists.allstarlink.org
> > > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-u
> > > > > sers
> > > > >
> > > > > To unsubscribe from this list please visit http://lists.allstar
> > > > > link.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> > > > > to the bottom of the page. Enter your email address and press
> > > > > the "Unsubscribe or edit options button"
> > > > > You do not need a password to unsubscribe, you can do it via
> > > > > email confirmation. If you have trouble unsubscribing, please
> > > > > send a message to the list detailing the problem.
> > > >
> > > >
> > > > _______________________________________________
> > > > App_rpt-users mailing list
> > > > App_rpt-users at lists.allstarlink.org
> > > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-use
> > > > rs
> > > >
> > > > To unsubscribe from this list please visit http://lists.allstarli
> > > > nk.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to
> > > > the bottom of the page. Enter your email address and press the
> > > > "Unsubscribe or edit options button"
> > > > You do not need a password to unsubscribe, you can do it via
> > > > email confirmation. If you have trouble unsubscribing, please
> > > > send a message to the list detailing the problem.
> > > >
> > >
> > >
> > >
> > > _______________________________________________
> > > App_rpt-users mailing list
> > > App_rpt-users at lists.allstarlink.org
> > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> > >
> > > To unsubscribe from this list please visit http://lists.allstarlink
> > > .org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > > bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > You do not need a password to unsubscribe, you can do it via email
> > > confirmation. If you have trouble unsubscribing, please send a
> > > message to the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit http://lists.allstarlink.o
> > rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> > bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a
> > message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180407/8b91822b/attachment.html>