[App_rpt-users] Static IP Config

Tue Apr 10 03:08:38 UTC 2018

You've specified a subnet mask of 255.255.255.255. A /32 address when
specified as the primary address on the system won't be able to route.
Anyone trying to follow this "example" will get confused when nothing works.

On Mon, Apr 9, 2018, 7:18 PM Loren Tedford <loren at lorentedford.com> wrote:

> *I just realized some might not understand what a gate ip is or broadcast
> etc.. So here is a demo example of how you could configure this.*
>
>
>
> Via ssh command line
>
> nano /etc/network/interfaces
>
>
>
> ### Put the following in
>
> # This file describes the network interfaces available on your system
>
> # and how to activate them. For more information, see interfaces(5).
>
>
>
> source /etc/network/interfaces.d/*
>
>
>
> # The loopback network interface
>
> auto lo
>
> iface lo inet loopback
>
>
>
> # The primary network interface
>
> auto eth0
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
>   address 192.168.9.100
>
>   netmask 255.255.255.255
>
>   broadcast 192.168.9.100
>
>   gateway 192.168.9.1
>
>   dns-nameservers 8.8.8.8
>
> ## Just to be sure gateway is working correctly add the below
>
>   post-up /sbin/ip route add 192.168.9.1  dev eth0
>
>   post-up /sbin/ip route add default via 192.168.9.1
>
>   pre-down /sbin/ip route delete 192.168.9.1 dev eth0
>
>   pre-down /sbin/ip route delete default via 192.168.9.1
>
>
>
> ## End of /etc/network/interfaces
>
>
>
> *For ip’s not on the same network segment often times like in data center
> environments you will have to do some thing like this. Below is an example
> keep in mind typically all these ip’s will be public ip’s not private ip’s*
>
>
>
> Via ssh command line
>
> nano /etc/network/interfaces
>
>
>
> ### Put the following in
>
> # This file describes the network interfaces available on your system
>
> # and how to activate them. For more information, see interfaces(5).
>
>
>
> source /etc/network/interfaces.d/*
>
>
>
> # The loopback network interface
>
> auto lo
>
> iface lo inet loopback
>
>
>
> # The primary network interface
>
> auto eth0
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
>   address 192.168.9.100
>
>   netmask 255.255.255.255
>
>   broadcast 192.168.9.100
>
>   gateway 10.0.0.254
>
>   dns-nameservers 8.8.8.8  ##Use their DNS name servers Trust me!
>
> ## Just to be sure gateway is working correctly add the below
>
>   post-up /sbin/ip route add 10.0.0.254  dev eth0
>
>   post-up /sbin/ip route add default via 10.0.0.254
>
>   pre-down /sbin/ip route delete 10.0.0.254 dev eth0
>
>   pre-down /sbin/ip route delete default via 10.0.0.254
>
>
>
> ## End of /etc/network/interfaces
>
>
>
>
>
>
>
>
>
>
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 – 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *Loren Tedford <loren at lorentedford.com>
> *Sent: *Monday, April 9, 2018 7:12 PM
> *To: *Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> *Subject: *Re: [App_rpt-users] Static IP Config
>
>
>
> Via ssh command line
>
> nano /etc/network/interfaces
>
>
>
> ### Put the following in
>
> # This file describes the network interfaces available on your system
>
> # and how to activate them. For more information, see interfaces(5).
>
>
>
> source /etc/network/interfaces.d/*
>
>
>
> # The loopback network interface
>
> auto lo
>
> iface lo inet loopback
>
>
>
> # The primary network interface
>
> auto eth0
>
> allow-hotplug eth0
>
> iface eth0 inet static
>
>   address ipaddr
>
>   netmask 255.255.255.255
>
>   broadcast ipaddr
>
>   gateway 192.168.1.1
>
>   dns-nameservers 8.8.8.8
>
> ## Just to be sure gateway is working correctly add the below
>
>   post-up /sbin/ip route add Gatewayip  dev eth0
>
>   post-up /sbin/ip route add default via Gatewayip
>
>   pre-down /sbin/ip route delete Gatewayip dev eth0
>
>   pre-down /sbin/ip route delete default via Gatewayip
>
>
>
> ## End of /etc/network/interfaces
>
>
>
> I hope the above helps you in setting your static ip on your system..
>
>
>
> Good luck if you need anything just holler!
>
>
>
>
>
>
>
>
>
>
>
> Loren Tedford (KC9ZHV)
> Phone Main: 1+ (631) 686 – 8878 Option 1
> Fax: 1-618-551-2755
> Email: loren at lorentedford.com
> Email: KC9ZHV at KC9ZHV.com
> http://www.lorentedford.com
> http://www.kc9zhv.com
> http://forum.kc9zhv.com
> http://hub.kc9zhv.com
> http://Ltcraft.net
> http://voipham.com
>
>
>
> *From: *CHARLES BENN <cbenn7 at verizon.net>
> *Sent: *Monday, April 9, 2018 5:56 PM
> *To: *app_rpt-users at lists.allstarlink.org
> *Subject: *[App_rpt-users] Static IP Config
>
>
>
> I loaded the new image and did the original set up with DHCP.
>
> I log on to the Console using root enter the info using the  ASL-Menu and
> save it but the IP remains DHCP.
>
> After hitting OK there is a quick flash of some info at the bottom of the
> screen but its is gone before I can read it.
>
>
>
> Any suggestions
>
> 73 Charlie WB2SNN 27904-27908
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180410/73357468/attachment.html>