[App_rpt-users] streaming node issues

[David Waters]

The line is typed exactly like it is on paper sent us from broadcastify. Like I dead it was working now it isn’t 
Not sure. What is wrong 
We have a space between the m m

David Waters

> On Apr 11, 2018, at 10:33 AM, Jeffrey Lehman, KC8QCH <kc8qch at gmail.com> wrote:
> 
> You are missing a space between the mm in the command. Try this one.
> 
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - 2> /tmp/stream.status | /usr/bin/ezstream -qvc /etc/ezstream.xml
> 
> I know this one works because I just pulled it off our node that is running broadcastify. I added the ability to send the status to a file. I don't run that on our node, but this should still work.
> 
> Jeff, KC8QCH
> 
> 
>> On 4/11/2018 10:05, Bryan Fields wrote:
>>> On 4/11/18 8:58 AM, David Waters wrote:
>>> Bryanhere is what we have  this used to work but now it puts us into a
>>> sterad transmitt mode on our radio attached to node.  we have startup line
>>> commented out at present,
>>> 
>>> Command line to startstream: outstreamcmd=/bin/sh,-c,/usr/bin/lame
>>> 
>>> --preset cbr 16 -r -mm -s 8 --bitwidth 16 - - 2> /tmp/stream.status |
>>> 
>>> /usr/bin/ezstream -qvc/etc/ezstream.xml
>> <snip>
>> 
>>> -bash: --preset:command not found
>> This is command from the shell saying it's trying to execute the one of the
>> flags to lame, rather than pass it to lame on the command line.
>> 
>> You have something wrong with your command, perhaps it's in quoted properly or
>> you have a CR/LF in it's place.
>> 
>> I've replied to the list so we all can benefit from this, and yahoo is not
>> allowing emails again.
>> 
> 
> -- 
> Jeff Lehman, KC8QCH
> https://kc8qch.ddns.net
> kc8qch at gmail.com
> 
> Webmaster
> Hamilton Couny ARPSC
> https://www.hamcoarpsc.org
> hamcoarpsc at gmail.com
> 
> AllStar 47374 Node Administrator
> World Wide Amateur Radio Guild
> https://theguildglobal.org
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.