[App_rpt-users] Announcing AllStarLink Asterisk version 1.01

[Steve Zingman]

Run as root or with sudo

On 04/20/2018 03:00 PM, K5CG wrote:
> Starting over.
>
> Brand new Pi 3 B +
> Formatted microSD card with SD Formatter.
> Re-flashed microSD card with Win32 Disk Imager
> Booted, "Resized root filesystem... rebooting"
>
> Logged in as repeater
> Changed password for "repeater" user
> /sudo su -/    to become root
> /passwd/    to set root user password
> Edited /etc/ssh/sshd_config to enable root login
> /systemctl restart ssh/   to refresh sshd config
>
> ip addr
> 192.168.1.225/24 (from DHCP)
> ssh to 192.168.1.225 as root user
>
> root at repeater:~# apt-mark hold raspberrypi-kernel-headers 
> raspberrypi-kernel
> raspberrypi-kernel-headers set on hold.
> raspberrypi-kernel set on hold.
>
> root at repeater:~#apt-get update
> Fetched 11.9 MB in 8s (1,361 kB/s)
> Reading package lists... Done
>
> root at repeater:~# apt-get upgrade -y
> Preparing...
> Unpacking...
> Yadda yadda...
> Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ...
> Setting up libicu57:armhf (57.1-6+deb9u2) ...
> Setting up raspi-config (20180406+1) ...
> Setting up perl (5.24.1-3+deb9u3) ...
> Setting up libssl1.0.2:armhf (1.0.2l-2+deb9u3) ...
> Processing triggers for libc-bin (2.24-11+deb9u3) ...
> Setting up libssl1.1:armhf (1.1.0f-3+deb9u2) ...
> Processing triggers for systemd (232-25+deb9u2) ...
> Setting up openssl (1.1.0f-3+deb9u2) ...
> Processing triggers for man-db (2.7.6.1-2) ...
> Setting up asl-asterisk-tools (1.01-20180226-10) ...
> Setting up libraspberrypi0 (1.20180417-1) ...
> Setting up libraspberrypi-doc (1.20180417-1) ...
> Setting up libraspberrypi-dev (1.20180417-1) ...
> Setting up libraspberrypi-bin (1.20180417-1) ...
> Processing triggers for libc-bin (2.24-11+deb9u3) ...
>
> root at repeater:~# reboot
>
> Now that the initial steps are done, do I run asl-menu as the user 
> repeater or root? The readme isn't specific.
>
>
> ------------------------------------------------------------------------
> *From: *"Steve Zingman" <szingman at msgstor.com>
> *To: *"Users of Asterisk app_rpt" <app_rpt-users at lists.allstarlink.org>
> *Sent: *Friday, April 20, 2018 1:12:01 PM
> *Subject: *Re: [App_rpt-users] Announcing AllStarLink Asterisk version 
> 1.01
>
> Danny,
> Did you do this before asl-menu?
>
> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel
> sudo apt-get update
> sudo apt-get upgrade -y
> sudo reboot
>
> Steve N4IRS
>
> On 4/20/2018 2:09 PM, K5CG wrote:
>
>     I downloaded the raspberry pi latest
>     http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.zip
>
>     I followed the included readme file instructions and It booted
>     fine but the asl-menu does not work correctly for the networking
>     (static IP), and it doesn't set the hostname or domain name. After
>     rebooting at the end of the process everything is the same as it
>     was. Hostname is still "repeater" and IP is still DHCP.
>
>     I seem to recall having this issue before on an older build. Is
>     there a trick to get this to work or must it be done manually?
>
>     Danny
>     K5CG
>
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180420/076eefb2/attachment.html>