[App_rpt-users] problem starting asterisk with latest image

[George J Csahanin]

Have it all installed on a Pi-Zero and linux boots fine, wifi connects 
fine, asterisk shows "segmentation fault" and in the log files:

/Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Service hold-off 
time over, scheduling restart.//
//Apr 23 03:24:20 repeater systemd[1]: Stopped Asterisk PBX and 
telephony daemon.//
//Apr 23 03:24:20 repeater systemd[1]: Started Asterisk PBX and 
telephony daemon.//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Main process 
exited, code=killed, status=11/SEGV//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Control process 
exited, code=killed status=11//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Unit entered 
failed state.//
//Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Failed with 
result 'signal'./

This repeats many times.
Really not sure where to start looking. I used ldd to see if libraries 
were ok, and all was fine:

/repeater at repeater:/var/log $ ldd /usr/sbin/asterisk//
//    /usr/lib/arm-linux-gnueabihf/libarmmem.so (0xb6f5b000)//
//    libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb6f48000)//
//    libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 
(0xb6f1f000)//
//    libtinfo.so.5 => /lib/arm-linux-gnueabihf/libtinfo.so.5 (0xb6ef0000)//
//    libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6e71000)//
//    libresolv.so.2 => /lib/arm-linux-gnueabihf/libresolv.so.2 
(0xb6e4c000)//
//    libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb6d0d000)//
//    /lib/ld-linux-armhf.so.3 (0xb6f71000)//
//repeater at repeater:/var/log $ /

Anybody have any suggestions?

GeorgeC W2DB
2360, 28599
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180422/eda7c8c4/attachment.html>