[App_rpt-users] problem starting asterisk with latest image

[Steve Zingman]

George,
The Raspberry Pi image for AllStarLink 1.01 does not support the Pi Zero 
or the Pi1 (ARMV6)
When I get time, I'll build Debian packages for the ARMV6 (not a image) 
You will be able to install on a existing Raspbian Stretch image.
I do not have a time frame for this.

73, Steve N4IRS

On 4/22/2018 11:30 PM, George J Csahanin wrote:
> Have it all installed on a Pi-Zero and linux boots fine, wifi connects 
> fine, asterisk shows "segmentation fault" and in the log files:
>
> /Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Service 
> hold-off time over, scheduling restart.//
> //Apr 23 03:24:20 repeater systemd[1]: Stopped Asterisk PBX and 
> telephony daemon.//
> //Apr 23 03:24:20 repeater systemd[1]: Started Asterisk PBX and 
> telephony daemon.//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Main process 
> exited, code=killed, status=11/SEGV//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Control 
> process exited, code=killed status=11//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Unit entered 
> failed state.//
> //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Failed with 
> result 'signal'./
>
> This repeats many times.
> Really not sure where to start looking. I used ldd to see if libraries 
> were ok, and all was fine:
>
> /repeater at repeater:/var/log $ ldd /usr/sbin/asterisk//
> //    /usr/lib/arm-linux-gnueabihf/libarmmem.so (0xb6f5b000)//
> //    libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb6f48000)//
> //    libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 
> (0xb6f1f000)//
> //    libtinfo.so.5 => /lib/arm-linux-gnueabihf/libtinfo.so.5 
> (0xb6ef0000)//
> //    libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6e71000)//
> //    libresolv.so.2 => /lib/arm-linux-gnueabihf/libresolv.so.2 
> (0xb6e4c000)//
> //    libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb6d0d000)//
> //    /lib/ld-linux-armhf.so.3 (0xb6f71000)//
> //repeater at repeater:/var/log $ /
>
> Anybody have any suggestions?
>
> GeorgeC W2DB
> 2360, 28599
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180423/9d8276e1/attachment.html>