[App_rpt-users] Repeater Stuck Locked open for 18 hrs

Loren Tedford loren at lorentedford.com
Tue Apr 24 19:10:51 UTC 2018


Hey Pierre by chance did you get to read the entire thread on this?

Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 – 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com

From: Pierre Martel
Sent: Tuesday, April 24, 2018 2:08 PM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs

I really dislike mechanical TOT. Why not use a small RPÏ that can monitor the 2 URI and use it to drive 2 or 3 relay? Those relay could, reset the MB, power off the radios, power off/on the router. 
 
A simple circuit that have a phototransistor that drive an input of the rpi would be easy to install, just use 2 small tube that cover  the geen  led to feed the phototransistor (maybe a simple straw would do!)  . pretty sur that just a npn phototransistor could be driven directly with just a small pull up resistor to make the sensing part of the circuit and the rest is just simple coding either in python or in C.  Could even had automation like ping fail that reset the router/wifi link. you could even monitor the ASL system for activity and compare the 'software state' to the hardware state. 


2018-04-24 13:25 GMT-04:00 Loren Tedford <loren at lorentedford.com>:
The way it stands at the moment I am not entirely sure… Here is what I found during reinstallation the Memory failed a self check that I ran while putting Windows on it to stress test the machine.. The hard drive doesn’t seem to want to take any data at this point.. But before attempting to format reinstall on this machine the system booted still.. My guess is some thing mechanical could have caused Asterisks to have failed at this point.. Honestly it seems to be a bit of a waste of my time to continue working on this machine when I have a second one exact specs sitting here ready to go.. We are doing the just in case TOT timer in the radios and this will affect autopatch users and anyone else that doesn’t let the system fully drop.. This is for my own re assurance that I have to the best of my ability solved the issue.. 
 
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 – 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
 
From: Steve Zingman
Sent: Tuesday, April 24, 2018 12:14 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
 
I'm a little confused, Did Asterisk fail or memory and possibly a motherboard?
On 4/24/2018 12:50 PM, Loren Tedford wrote:
Well technically it could have been controlled by the two meter repeater had the two meter repeater responded under normal circumstances.. What I am going to do for future repeater operations is to put TOT timers on the radio and I don’t care whether individuals on Autopatch that are calling Emergency services get disconnect etc because of radio tot.. No longer am I going to rely on asterisk to handle the TOT primarly.. Because of this experience.. We now know that we have fried some memory and possibly a motherboard but my testing at this point is stopping.. Moving forward with new gear..
 
We originally turned off the TOT timer in the radios because of scenario involving autopatch and calling during severe weather..
 
Loren Tedford (KC9ZHV) 
Phone Main: 1+ (631) 686 – 8878 Option 1
Fax: 1-618-551-2755
Email: loren at lorentedford.com
Email: KC9ZHV at KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net
http://voipham.com
 
From: DuaneVT .
Sent: Tuesday, April 24, 2018 11:46 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Repeater Stuck Locked open for 18 hrs
 
Radio Control was referenced as "Auxiliary Service".
 
Per Part 97 : Sec. 97.201 Auxiliary station

(a) Any amateur station licensed to a holder of a Technician, General, Advanced or Amateur Extra Class operator license may be an auxiliary station. A holder of a Technician, General, Advanced or Amateur Extra Class operator license may be the control operator of an auxiliary station, subject to the privileges of the class of operator license held.
(b) An auxiliary station may transmit only on the 2 m and shorter wavelength bands, except the 144.0–144.5 MHz, 145.8–146.0 MHz, 219–220 MHz, 222.00–222.15 MHz, 431–433 MHz, and 435–438 MHz segments.
So 2 meters and above now.
73, Duane KA1LM
 
 


_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
 
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
 
 

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180424/db6f7a79/attachment.html>


More information about the App_rpt-users mailing list