[App_rpt-users] Rxondelay in SimpleUsb

[Mike]

Actually found this on the old drupal site:


;rxondelay=20		; Uncomment and/or adjust for simplex nodes to eliminate 
"Ping
                         ; Ponging" or "Relay Racing".
			; A positive value here will instruct the usbradio driver to ignore
                         ; the COR line for a specified number of 20mSec 
intervals following
                         ; the release of PTT. Use this only on simplex 
nodes, and
                         ; leave commented out for repeaters or other 
full duplex nodes.



So, it has no effect on duplex modes.
Perhaps there is hope for my brain...LOL...

...mike/kb8jnm

On 8/3/2018 8:04 AM, Angelo wrote:
>   Good morning all,
> 
> 
>   I have been trying to set the rxondelay in the simpleusb to different 
> values. No matter what value I put in, it seems the behavior does not 
> change. I remember reading a while back that function may not be 
> compiled standard release.
> 
>   I am running the new version of ASL. I think the release was in April 
> of this year.  Can anyone confirm this?
> 
> 73 de Angelo
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and 
> scroll down to the bottom of the page. Enter your email address and 
> press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.