[App_rpt-users] Disable Receiver for X milliseconds after TX UNKEY

[Skyler F]

>
>
> Can you please be more specific what you mean by “ping pong” issue and
> sends a pulse through the network?   I am presently using half duplex here
> and have not experienced anything as you describe.  What radio are you
> using and how is it interfaced?

When I unkey, the receiver keys up for 50ms sending a carrier through the
network any time someone unkeys.

This is a motorola Maxtrac setup as a remote base listening to a certain
repeater which is setup for "TX PL on Input Only" through the radio club.
The repeater is a tad bit slow on it's Transmit CTCSS turning off however,
so it sends a bit through the network when the remote base unkeys.

If that makes any sense....

On Mon, Aug 6, 2018 at 4:33 PM William Becks <wllmbecks at gmail.com> wrote:

> Hi Skyler,
>
>
>
> Can you please be more specific what you mean by “ping pong” issue and
> sends a pulse through the network?   I am presently using half duplex here
> and have not experienced anything as you describe.  What radio are you
> using and how is it interfaced?
>
>
>
> Bill, WA8WG
>
>
>
>
>
> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
> Behalf Of *Skyler F
> *Sent:* Monday, August 6, 2018 5:18 PM
> *To:* Users of Asterisk app_rpt <app_rpt-users at lists.allstarlink.org>
> *Subject:* [App_rpt-users] Disable Receiver for X milliseconds after TX
> UNKEY
>
>
>
> I am dealing with a system (half duplex), which sends a pulse through the
> network. I've had this question quite a bit, but never been able to word it
> right. Hope this is understandable.
>
>
>
> This "ping pong" issue only occurs after the transmitter is unkeyed.
> There is no way to fix this in hardware ( don't need to complicate it by
> going into technical details on how the link is setup)
>
>
>
> RXONDELAY WORKS, but it is sort of pointless because now the beginning of
> everybody's transmission gets cut off, and is physically does not need to
> be.
>
>
>
> We are really looking for
>
>
>
> TX UNKEYS ------>   Disable RX ------ > Wait 1/4 second ------> Enable RX
>
>
>
> NOT
>
> RXONDELAY:
>
> USER KEYS --->  DISABLE RX ------>  WAIT 1/4 Second -----> ENABLE RX
>
>
>
> Is there any way to perform the function in mind? ( in either usbradio, or
> simpleusb). Has anybody here thought about this before?
>
>
>
> Thank You,
>
> Skyler KDØWHB
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>


-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180806/792eebfb/attachment.html>