[App_rpt-users] Using a handmic while using a URI

[William Becks]

The iaxRpt app works really well but if you could interface at least the microphone line through a RIGblaster if you have one laying around.   You obviously would not use the internal USB sound device if your blaster model is so equipped, but would rather just route the mic audio and PTT through the blaster and connect your stock microphone to the front mic port.   The last option would be to homebrew a switchbox with a connector that fits your mic and a cable with an RJ45 plug to your radio and will only need to wire in DPDT toggle switch that will allow you to switch the transceivers mic and PTT lines between the local microphone and the URI.

 

Bill,

 

WA8WG

 

 

From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On Behalf Of Noah Chalker
Sent: Wednesday, August 8, 2018 7:44 PM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Using a handmic while using a URI

 

Bill and all,

 

It does not. The only ports are the RJ45 for the microphone and the speaker output on the back. The alternative is possible but I rather find a solution to using the stock mic. 

 

KE5VQL

 

On Wed, Aug 8, 2018 at 7:35 PM William Becks <wllmbecks at gmail.com <mailto:wllmbecks at gmail.com> > wrote:

Noah,

 

Does your radio have an auxiliary connector where you could connect the URI to leave your RJ45 connector free to use with the microphone?    Alternatively, you might consider installing iaxRpt on one of your PC’s that will give you a desktop dispatch application type access to the radio over via the URI over your LAN.  I do that here and it works great.  

 

Bill, WA8WG

    

 

From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org <mailto:app_rpt-users-bounces at lists.allstarlink.org> > On Behalf Of Noah Chalker
Sent: Wednesday, August 8, 2018 7:21 PM
To: App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org> 
Subject: [App_rpt-users] Using a handmic while using a URI

 

Hey folks,

 

I am still planning out the setup for my node. One issue that came up is that of microphones. With the URI, I will have to connect it to the microphone jack of the radio using a RJ45 and to the speaker output. The speaker problem can be easily solved with a splitter. As far as the mic goes, I am a bit confused. If the URI is plugged into the mic port, I obviously cannot use the radio with a hand mic. Is there a way that I can simultaneously use the radio with a RJ45 mic connector at the same time that the URI is connected?

 

KE5VQL

 

Noah

_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org> 
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



-- 

From,
         Noah Chalker
2Do not conform any longer to the pattern of this world, but be transformed by the renewing of your mind. Then you will be able to test and approve what God's will is—his good, pleasing and perfect will.
Romans 12:2

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180808/99e494d6/attachment.html>