[App_rpt-users] Using a handmic while using a URI

[Noah Chalker]

Well, I need the radio to be able to use the microphone. I know that it is
not the easy solution but it is the one that I am going for. I do not want
to open up the radio so I am going to try and design a circuit so that the
mic and the URI can be connected into the microphone jack. I will also
include some digital logic so that if both the URI and the mic a trying to
key up, then only the signal from the mic will go through. I will try and
upload a schematic later.

Noah

On Wed, Aug 8, 2018 at 10:58 PM Ben Piecora <piecorab at gmail.com> wrote:

> Well, you could take apart the radio and solder to the back of the mic
> jack, which I have done in the past, but if youre using it for an allstar
> node there will not be much purpose for the mic as it will only TX to the
> radios listening to the output frequency of the node, and will not be
> transmitted via any internet links.
>
> On Wed, Aug 8, 2018 at 8:58 PM William Becks <wllmbecks at gmail.com> wrote:
>
>> The iaxRpt app works really well but if you could interface at least the
>> microphone line through a RIGblaster if you have one laying around.   You
>> obviously would not use the internal USB sound device if your blaster model
>> is so equipped, but would rather just route the mic audio and PTT through
>> the blaster and connect your stock microphone to the front mic port.   The
>> last option would be to homebrew a switchbox with a connector that fits
>> your mic and a cable with an RJ45 plug to your radio and will only need to
>> wire in DPDT toggle switch that will allow you to switch the transceivers
>> mic and PTT lines between the local microphone and the URI.
>>
>>
>>
>> Bill,
>>
>>
>>
>> WA8WG
>>
>>
>>
>>
>>
>> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
>> Behalf Of *Noah Chalker
>> *Sent:* Wednesday, August 8, 2018 7:44 PM
>> *To:* app_rpt-users at lists.allstarlink.org
>> *Subject:* Re: [App_rpt-users] Using a handmic while using a URI
>>
>>
>>
>> Bill and all,
>>
>>
>>
>> It does not. The only ports are the RJ45 for the microphone and the
>> speaker output on the back. The alternative is possible but I rather find a
>> solution to using the stock mic.
>>
>>
>>
>> KE5VQL
>>
>>
>>
>> On Wed, Aug 8, 2018 at 7:35 PM William Becks <wllmbecks at gmail.com> wrote:
>>
>> Noah,
>>
>>
>>
>> Does your radio have an auxiliary connector where you could connect the
>> URI to leave your RJ45 connector free to use with the microphone?
>> Alternatively, you might consider installing iaxRpt on one of your PC’s
>> that will give you a desktop dispatch application type access to the radio
>> over via the URI over your LAN.  I do that here and it works great.
>>
>>
>>
>> Bill, WA8WG
>>
>>
>>
>>
>>
>> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
>> Behalf Of *Noah Chalker
>> *Sent:* Wednesday, August 8, 2018 7:21 PM
>> *To:* App_rpt-users at lists.allstarlink.org
>> *Subject:* [App_rpt-users] Using a handmic while using a URI
>>
>>
>>
>> Hey folks,
>>
>>
>>
>> I am still planning out the setup for my node. One issue that came up is
>> that of microphones. With the URI, I will have to connect it to the
>> microphone jack of the radio using a RJ45 and to the speaker output. The
>> speaker problem can be easily solved with a splitter. As far as the mic
>> goes, I am a bit confused. If the URI is plugged into the mic port, I
>> obviously cannot use the radio with a hand mic. Is there a way that I can
>> simultaneously use the radio with a RJ45 mic connector at the same time
>> that the URI is connected?
>>
>>
>>
>> KE5VQL
>>
>>
>>
>> Noah
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>> --
>>
>> From,
>>          Noah Chalker
>> 2Do not conform any longer to the pattern of this world, but be
>> transformed by the renewing of your mind. Then you will be able to test and
>> approve what God's will is—his good, pleasing and perfect will.
>> Romans 12:2
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
> --
> Ben
> K2CPU
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>


-- 
From,
         Noah Chalker
2Do not conform any longer to the pattern of this world, but be transformed
by the renewing of your mind. Then you will be able to test and approve
what God's will is—his good, pleasing and perfect will.
Romans 12:2
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180809/64c647cf/attachment.html>