[App_rpt-users] Using a handmic while using a URI

[Ben Piecora]

Then grab the recieved audio from the high side of the volume control pot.

On Wed, Aug 8, 2018 at 11:58 PM Ben Piecora <piecorab at gmail.com> wrote:

> Well, you could take apart the radio and solder to the back of the mic
> jack, which I have done in the past, but if youre using it for an allstar
> node there will not be much purpose for the mic as it will only TX to the
> radios listening to the output frequency of the node, and will not be
> transmitted via any internet links.
>
> On Wed, Aug 8, 2018 at 8:58 PM William Becks <wllmbecks at gmail.com> wrote:
>
>> The iaxRpt app works really well but if you could interface at least the
>> microphone line through a RIGblaster if you have one laying around.   You
>> obviously would not use the internal USB sound device if your blaster model
>> is so equipped, but would rather just route the mic audio and PTT through
>> the blaster and connect your stock microphone to the front mic port.   The
>> last option would be to homebrew a switchbox with a connector that fits
>> your mic and a cable with an RJ45 plug to your radio and will only need to
>> wire in DPDT toggle switch that will allow you to switch the transceivers
>> mic and PTT lines between the local microphone and the URI.
>>
>>
>>
>> Bill,
>>
>>
>>
>> WA8WG
>>
>>
>>
>>
>>
>> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
>> Behalf Of *Noah Chalker
>> *Sent:* Wednesday, August 8, 2018 7:44 PM
>> *To:* app_rpt-users at lists.allstarlink.org
>> *Subject:* Re: [App_rpt-users] Using a handmic while using a URI
>>
>>
>>
>> Bill and all,
>>
>>
>>
>> It does not. The only ports are the RJ45 for the microphone and the
>> speaker output on the back. The alternative is possible but I rather find a
>> solution to using the stock mic.
>>
>>
>>
>> KE5VQL
>>
>>
>>
>> On Wed, Aug 8, 2018 at 7:35 PM William Becks <wllmbecks at gmail.com> wrote:
>>
>> Noah,
>>
>>
>>
>> Does your radio have an auxiliary connector where you could connect the
>> URI to leave your RJ45 connector free to use with the microphone?
>> Alternatively, you might consider installing iaxRpt on one of your PC’s
>> that will give you a desktop dispatch application type access to the radio
>> over via the URI over your LAN.  I do that here and it works great.
>>
>>
>>
>> Bill, WA8WG
>>
>>
>>
>>
>>
>> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
>> Behalf Of *Noah Chalker
>> *Sent:* Wednesday, August 8, 2018 7:21 PM
>> *To:* App_rpt-users at lists.allstarlink.org
>> *Subject:* [App_rpt-users] Using a handmic while using a URI
>>
>>
>>
>> Hey folks,
>>
>>
>>
>> I am still planning out the setup for my node. One issue that came up is
>> that of microphones. With the URI, I will have to connect it to the
>> microphone jack of the radio using a RJ45 and to the speaker output. The
>> speaker problem can be easily solved with a splitter. As far as the mic
>> goes, I am a bit confused. If the URI is plugged into the mic port, I
>> obviously cannot use the radio with a hand mic. Is there a way that I can
>> simultaneously use the radio with a RJ45 mic connector at the same time
>> that the URI is connected?
>>
>>
>>
>> KE5VQL
>>
>>
>>
>> Noah
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>> --
>>
>> From,
>>          Noah Chalker
>> 2Do not conform any longer to the pattern of this world, but be
>> transformed by the renewing of your mind. Then you will be able to test and
>> approve what God's will is—his good, pleasing and perfect will.
>> Romans 12:2
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
> --
> Ben
> K2CPU
>


-- 
Ben
K2CPU
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180809/aabdb4d9/attachment.html>