[App_rpt-users] BIG registration problem this morning

[Paul - KN2R]

Tim,

 

I am for putting the previous Registration server back in operation!

 

All my nodes are having problems registering with different port numbers I do not have configured anywhere.

I use a commercial grade SonicWall TZ-205N firewall/router which has been working fine for years!

No changes have been made to that server or the router in over a year or two.  Now all of a sudden, since the change, all is not working.

 

Paul / KN2R

 

 

From: App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org] On Behalf Of Tim Sawyer
Sent: Monday, August 13, 2018 1:15 AM
To: Users of Asterisk app_rpt
Subject: Re: [App_rpt-users] BIG registration problem this morning

 

Why do some nodes not have this problem? Is NAT somehow different from different routers? I'd really like to understand so I can take it back to the technical folks and explain why it needs to be put back the way it was.

 

On Sun, Aug 12, 2018 at 8:06 PM Danny K5CG <k5cg at hamoperator.org> wrote:

I'm running pfSense and I "could" setup a static port for the outbound NAT but since when does the source port ever match the destination port, for any protocol? I'm not touching it.

46679*CLI> iax2 show registry
Host                  dnsmgr  Username        Perceived             Refresh  State
44.98.254.145:4569    Y       46679           47.187.195.172:29961       60  Auth. Sent

4569 is what's set on the portal for my node. 29961 appears to be what is recorded on the server from my registration.

The portal port needs to be used or there has to be a way to set the port in rpt.conf to have that communicated to the registration server. Relying on the source port (which can be anything) is not a good idea.

Next steps?

Danny
K5CG
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




 

-- 

Tim WD6AWP

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180813/6c05fb5a/attachment.html>