[App_rpt-users] BIG registration problem this morning

[Bryan St Clair]

My understanding pfSense rewrites the source port on outgoing packets.
Not all router manufacturers do this.

On Sun, Aug 12, 2018 at 10:15 PM, Tim Sawyer <tisawyer at gmail.com> wrote:
> Why do some nodes not have this problem? Is NAT somehow different from
> different routers? I'd really like to understand so I can take it back to
> the technical folks and explain why it needs to be put back the way it was.
>
> On Sun, Aug 12, 2018 at 8:06 PM Danny K5CG <k5cg at hamoperator.org> wrote:
>>
>> I'm running pfSense and I "could" setup a static port for the outbound NAT
>> but since when does the source port ever match the destination port, for any
>> protocol? I'm not touching it.
>>
>> 46679*CLI> iax2 show registry
>> Host                  dnsmgr  Username        Perceived
>> Refresh  State
>> 44.98.254.145:4569    Y       46679           47.187.195.172:29961
>> 60  Auth. Sent
>>
>> 4569 is what's set on the portal for my node. 29961 appears to be what is
>> recorded on the server from my registration.
>>
>> The portal port needs to be used or there has to be a way to set the port
>> in rpt.conf to have that communicated to the registration server. Relying on
>> the source port (which can be anything) is not a good idea.
>>
>> Next steps?
>>
>> Danny
>> K5CG
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
>
> --
> Tim WD6AWP
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Bryan
K6CBR
bryan at k6cbr.us
Allstar Base: 43918, 43991
Allstar Hub: 43919, 47036
www.k6cbr.us
QRZ