[App_rpt-users] Setting Up a Chicken Link With ASL

[John Heron]

Just have to ask… Is it close enough for an RF link? Just treat it as a remove base.

All the best, John Heron

WA4FAP
678-701-4845
jh0932 at gmail.com

> On Aug 19, 2018, at 12:53 AM, Bob Pyke <k6ecm1 at gmail.com> wrote:
> 
> The local club wants to link two repeaters (local and remote) using a 440 link. I’d like to see just how serious folks are about this before we go to all that expense. I’m looking for some pointers as I attempt to setup a “chicken link” with our remote repeater using a local radio attached to an Allstarlink node. The radio operates in half-duplex with the receive audio out over the internet, and the audio coming in from the internet is transmitted to the remote repeater. My first attempt resulted in ping ponging between the repeater and my local radio. I’m certainly missing something. I’m looking for some added insights. I started by using duplex=0 in rpt.conf
> 
> Thanks,
> Bob
> K6ECM
> 
> Sent from iPad
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.