[App_rpt-users] Issue with Node 45467 No PTT on node actions

William Becks wllmbecks at gmail.com
Mon Aug 20 15:17:08 UTC 2018


Keith,

You might also want to build the loopback fixture for the URIx and run uridiag.  The various GPIO lines of the URIx are chained or looped to facilitate a quick I/O test.

Bill, WA8WG


-----Original Message-----
From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On Behalf Of Mike
Sent: Monday, August 20, 2018 9:43 AM
To: app_rpt-users at lists.allstarlink.org
Subject: Re: [App_rpt-users] Issue with Node 45467 No PTT on node actions

Keith, I let this fester in my head a while, While not being familiar with the DMK, and my only thoughts are to check the DMK and be sure the PTT transistor buffer isn't 'wimping-out"

Outside of that, look for corruptions in your usbradio file with 
notepad++ or similar to 'see all characters'.

But you might take a peak at app_rpt vars while this is happening to give you a better clue where to look...

asterisk -rx rpt showvars NODE#

This should tell you a bit closer to look at software or hardware first.

See if the TX is up at that point AND when the cos is active which is the other half of what you should be looking at.

Hope it helps and you find it.

...mike/kb8jnm

On 8/19/2018 1:07 PM, Keith Dobbins wrote:
> I'm having an issue with my node that just started recently. It appears to be dead from the perspective that no action will cause a PTT to occur. I can execute susb key and it works fine from asterisk -rv but when I issue a rpt fun 45467 *722 to speak the time, I see the commands in the asterisk console, BUT no PTT action takes place and my node doesn't key up. Anywhere I can look to find out what the heck is going on? This a weird problem to me and like I said it has been working fine for months. I did a full re-install and it worked fine for a day or so then it's right back to where it was before. Latest version of the 1.1 install. DMK URI and Intel D525 Atom Board.
> Thanks for any guidance!
> Keith DobbinsSr. IT Systems EngineerManaged File Transfer/Mainframe 
> Networks3402 Linden Street Parkersburg, WV 26104-1608   Amateur Radio 
> Call Sign: N8KLD
> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 




More information about the App_rpt-users mailing list