[App_rpt-users] Remote base
Kevin Babich
kevin.babich at gmail.com
Mon Dec 3 22:46:58 UTC 2018
David, thank you.
Implementation of a TM-271 with a USB programming cable is the real essence of your swanky implementation.. Please share this, should you have it available. I might be inclined to use a dual band TM-V71A, as I have a new one sitting unused. I suspect they will interface similarly, save for some of the dual band features.
Kindest Regards,
Kevin Babich | N9IAA
Valparaiso, IN 46383
Mobile: 219.406.9707
Cessna 421
Cesssna Conquest I/II
Beechcraft King Air 90/200
“…It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...” -Theodore Roosevelt
From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> On Behalf Of David Shaw
Sent: Monday, December 3, 2018 4:40 PM
To: APP RPT <app_rpt-users at lists.allstarlink.org>
Subject: Re: [App_rpt-users] Remote base
I guess I should have read this. I'm using a 4 port card. So change the rxchannel =
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Mon, Dec 3, 2018 at 2:38 PM David Shaw <shawpbx at gmail.com <mailto:shawpbx at gmail.com> > wrote:
Sorry, In the rpt.conf file under the node. You might need to change the:
statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
Just use the sameones as your regular nodes.
David
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Mon, Dec 3, 2018 at 2:35 PM David Shaw <shawpbx at gmail.com <mailto:shawpbx at gmail.com> > wrote:
rpt.conf
[2064]
rxchannel = Zap/2 ; Rx audio/signalling channel
remote = tm271 ; Enable to support Kenwood TMG-707
ioport=/dev/ttyUSB0
functions = remote-functions ; Remote function list
;telemetry=telemetry2
statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
; Remote function table
[remote-functions]
0=remote,1 ; Retrieve Memory
1=remote,2 ; Set freq.
2=remote,3 ; Set tx PL tone
3=remote,4 ; Set rx PL tone
40=remote,100 ; Rx PL off
41=remote,101 ; Rx PL on
42=remote,102 ; Tx PL off
43=remote,103 ; Tx PL on
44=remote,104 ; Low Power
45=remote,105 ; Medium Power
46=remote,106 ; High Power
;711=remote,107 ; Bump -20
;714=remote,108 ; Bump -100
;717=remote,109 ; Bump -500
;713=remote,110 ; Bump +20
;716=remote,111 ; Bump +100
;719=remote,112 ; Bump +500
;721=remote,113 ; Scan - slow
;724=remote,114 ; Scan - quick
;727=remote,115 ; Scan - fast
;723=remote,116 ; Scan + slow
;726=remote,117 ; Scan + quick
;729=remote,118 ; Scan + fast
;79=remote,119 ; Tune
51=remote,5 ; Long status query
52=remote,140 ; Short status query
;6=remote,6 ; Set mode
;8=remote,99 ; remote base log in
;9=cop,6 ; Phone PTT command
8226242=remote,99,WB6NIL,G ;Jim
80401=remote,99,WA6ZFT,E ;Steve
80113=remote,99,KE6UPI,F ;David Shaw
80114=remote,99,W4WWM,T ;Will
80210=remote,99,WA6SYN,G ;Bob Hatfield
80211=remote,99,WD6V,G :David K.
[nodes]
; Note, if you are using automatic update for allstar link nodes,
; no allstar link nodes should be defined here. Only place a definition
; for your locak nodes, and private (off of allstar link) nodes here.
2063 = radio at 127.0.0.1:4569/2063,NONE <http://radio@127.0.0.1:4569/2063,NONE> ; This must be changed to your node number
2064 = radio at 127.0.0.1:4569/2064,NONE,y <http://radio@127.0.0.1:4569/2064,NONE,y>
**Extras**
; Memories for remote bases
[memory]
; Call Simplex
11 = 146.520,100.0,sm
; Simplex
12 = 146.550,100.0,sm
; FARC FallBrook Red MTN
13 = 146.175,107.2,+mt
; GTARC Temecula, Ca
14 = 146.805,100.0,-mt
[macro]
11 = *32064*42064*80113*011# ;2M Simplex
12 = *32064*42064*80113*012# ;2M Simplex 146.550
13 = *32064*42064*80113*013# ;Red MTN
---------------------------------------------------------------------------------------
iax.conf you'll need to add
register=2064:297615 at register.allstarlink.org <mailto:2064%3A297615 at register.allstarlink.org>
Later, I'll write up a howto for the TM271.
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Sun, Dec 2, 2018 at 6:24 PM Kevin Babich <kevin.babich at gmail.com <mailto:kevin.babich at gmail.com> > wrote:
Dave,
Wiring is straight forward, best as I can tell. Configuration for programming, is my interest.
Best,
Kevin J. Babich
219.406.9707 Mobile
***Mobile EMail***
Please excuse any typos and brevity.
On Dec 2, 2018, at 7:28 PM, David Shaw <shawpbx at gmail.com <mailto:shawpbx at gmail.com> > wrote:
Sorry I'm out of town. What are you looking for? Wiring or Configuration?
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Sat, Dec 1, 2018 at 2:10 PM Kevin Babich <kevin.babich at gmail.com <mailto:kevin.babich at gmail.com> > wrote:
David,
Would you be willing to share the implementation? I’d like to plagiarize your method for programming the 271.
Best,
Kevin J. Babich
219.406.9707 Mobile
***Mobile EMail***
Please excuse any typos and brevity.
On Dec 1, 2018, at 3:50 PM, David Shaw <shawpbx at gmail.com <mailto:shawpbx at gmail.com> > wrote:
Yes, Both the TM-271 and the TM-D700.
TM-271a using a Raspberry Pi, USB programming cable and a URI.
TM-D700 old school using the 4 port AllStarLink card that Steve (WA6ZFT) and Jim (WB6NIL) designed.
David
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Fri, Nov 30, 2018 at 3:19 PM Kevin Babich <kevin.babich at gmail.com <mailto:kevin.babich at gmail.com> > wrote:
Greetings,
Has anyone successfully integrated a Kenwood radio into Allstar with full Remote Base functionality (frequency, offset, etc.)? If so, can you please share which radio was integrated / interfacing / etc.?
Kindest Regards,
Kevin Babich | N9IAA
Valparaiso, IN 46383
Mobile: 219.406.9707
Cessna 421
Cesssna Conquest I/II
Beechcraft King Air 90/200
“…It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat...” -Theodore Roosevelt
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181203/e8605780/attachment.html>
More information about the App_rpt-users
mailing list