[App_rpt-users] Remote base
David Shaw
shawpbx at gmail.com
Mon Dec 3 23:30:57 UTC 2018
The usb has easy. In the rpt.conf file under the node statement. You'll see
ioport=. To fine the ioport plugin the USB programming cable and run dmesg.
I'll work on a howto later in the week or mid next week.
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither
inclined nor determined to commit crimes. Such laws make things worse for
the assaulted and better for the assailants; they serve rather to encourage
than prevent homicides, for an unarmed man may be attacked with greater
confidence than an armed one."
Thomas Jefferson
On Mon, Dec 3, 2018 at 2:47 PM Kevin Babich <kevin.babich at gmail.com> wrote:
> David, thank you.
>
>
>
> Implementation of a TM-271 with a USB programming cable is the real
> essence of your swanky implementation.. Please share this, should you have
> it available. I might be inclined to use a dual band TM-V71A, as I have a
> new one sitting unused. I suspect they will interface similarly, save for
> some of the dual band features.
>
>
>
> Kindest Regards,
>
>
>
> Kevin Babich | N9IAA
>
> Valparaiso, IN 46383
>
>
>
> Mobile: 219.406.9707
>
>
>
> Cessna 421
>
> Cesssna Conquest I/II
>
> Beechcraft King Air 90/200
>
>
>
> “…It is not the critic who counts; not the man who points out how the
> strong man stumbles, or where the doer of deeds could have done them
> better. The credit belongs to the man who is actually in the arena, whose
> face is marred by dust and sweat and blood; who strives valiantly; who
> errs, who comes short again and again, because there is no effort without
> error and shortcoming; but who does actually strive to do the deeds; who
> knows great enthusiasms, the great devotions; who spends himself in a
> worthy cause; who at the best knows in the end the triumph of high
> achievement, and who at the worst, if he fails, at least fails while daring
> greatly, so that his place shall never be with those cold and timid souls
> who neither know victory nor defeat...” -Theodore Roosevelt
>
>
>
> *From:* App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> *On
> Behalf Of *David Shaw
> *Sent:* Monday, December 3, 2018 4:40 PM
> *To:* APP RPT <app_rpt-users at lists.allstarlink.org>
> *Subject:* Re: [App_rpt-users] Remote base
>
>
>
> I guess I should have read this. I'm using a 4 port card. So change the
> rxchannel =
>
>
>
>
>
> --
>
> Thanks, David
>
>
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
>
> Thomas Jefferson
>
>
>
>
>
> On Mon, Dec 3, 2018 at 2:38 PM David Shaw <shawpbx at gmail.com> wrote:
>
> Sorry, In the rpt.conf file under the node. You might need to change the:
>
>
> statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>
>
>
> Just use the sameones as your regular nodes.
>
>
>
> David
>
>
>
>
>
>
> --
>
> Thanks, David
>
>
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
>
> Thomas Jefferson
>
>
>
>
>
> On Mon, Dec 3, 2018 at 2:35 PM David Shaw <shawpbx at gmail.com> wrote:
>
>
>
>
>
> rpt.conf
>
> [2064]
>
>
>
> rxchannel = Zap/2 ; Rx audio/signalling channel
>
> remote = tm271 ; Enable to support Kenwood TMG-707
>
> ioport=/dev/ttyUSB0
>
> functions = remote-functions ; Remote function list
>
> ;telemetry=telemetry2
>
>
> statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
>
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
>
>
>
>
>
> ; Remote function table
>
>
>
> [remote-functions]
>
> 0=remote,1 ; Retrieve Memory
>
> 1=remote,2 ; Set freq.
>
> 2=remote,3 ; Set tx PL tone
>
> 3=remote,4 ; Set rx PL tone
>
> 40=remote,100 ; Rx PL off
>
> 41=remote,101 ; Rx PL on
>
> 42=remote,102 ; Tx PL off
>
> 43=remote,103 ; Tx PL on
>
> 44=remote,104 ; Low Power
>
> 45=remote,105 ; Medium Power
>
> 46=remote,106 ; High Power
>
> ;711=remote,107 ; Bump -20
>
> ;714=remote,108 ; Bump -100
>
> ;717=remote,109 ; Bump -500
>
> ;713=remote,110 ; Bump +20
>
> ;716=remote,111 ; Bump +100
>
> ;719=remote,112 ; Bump +500
>
> ;721=remote,113 ; Scan - slow
>
> ;724=remote,114 ; Scan - quick
>
> ;727=remote,115 ; Scan - fast
>
> ;723=remote,116 ; Scan + slow
>
> ;726=remote,117 ; Scan + quick
>
> ;729=remote,118 ; Scan + fast
>
> ;79=remote,119 ; Tune
>
> 51=remote,5 ; Long status query
>
> 52=remote,140 ; Short status query
>
> ;6=remote,6 ; Set mode
>
> ;8=remote,99 ; remote base log in
>
> ;9=cop,6 ; Phone PTT command
>
> 8226242=remote,99,WB6NIL,G ;Jim
>
> 80401=remote,99,WA6ZFT,E ;Steve
>
> 80113=remote,99,KE6UPI,F ;David Shaw
>
> 80114=remote,99,W4WWM,T ;Will
>
> 80210=remote,99,WA6SYN,G ;Bob Hatfield
>
> 80211=remote,99,WD6V,G :David K.
>
>
>
> [nodes]
>
> ; Note, if you are using automatic update for allstar link nodes,
>
> ; no allstar link nodes should be defined here. Only place a definition
>
> ; for your locak nodes, and private (off of allstar link) nodes here.
>
>
>
> 2063 = radio at 127.0.0.1:4569/2063,NONE ; This must be changed to your
> node number
>
> 2064 = radio at 127.0.0.1:4569/2064,NONE,y
>
>
>
>
>
>
>
> **Extras**
>
> ; Memories for remote bases
>
>
>
> [memory]
>
>
>
> ; Call Simplex
>
> 11 = 146.520,100.0,sm
>
> ; Simplex
>
> 12 = 146.550,100.0,sm
>
> ; FARC FallBrook Red MTN
>
> 13 = 146.175,107.2,+mt
>
> ; GTARC Temecula, Ca
>
> 14 = 146.805,100.0,-mt
>
>
>
> [macro]
>
> 11 = *32064*42064*80113*011# ;2M Simplex
>
> 12 = *32064*42064*80113*012# ;2M Simplex 146.550
>
> 13 = *32064*42064*80113*013# ;Red MTN
>
>
>
>
> ---------------------------------------------------------------------------------------
>
> iax.conf you'll need to add
>
> register=2064:297615 at register.allstarlink.org
>
>
>
> Later, I'll write up a howto for the TM271.
>
>
>
>
>
>
>
>
>
> --
>
> Thanks, David
>
>
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
>
> Thomas Jefferson
>
>
>
>
>
> On Sun, Dec 2, 2018 at 6:24 PM Kevin Babich <kevin.babich at gmail.com>
> wrote:
>
> Dave,
>
>
>
> Wiring is straight forward, best as I can tell. Configuration for
> programming, is my interest.
>
>
>
> Best,
>
> Kevin J. Babich
>
>
>
> 219.406.9707 Mobile
>
>
>
> ***Mobile EMail***
>
>
>
> Please excuse any typos and brevity.
>
>
> On Dec 2, 2018, at 7:28 PM, David Shaw <shawpbx at gmail.com> wrote:
>
> Sorry I'm out of town. What are you looking for? Wiring or Configuration?
>
>
>
>
>
> --
>
> Thanks, David
>
>
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
>
> Thomas Jefferson
>
>
>
>
>
> On Sat, Dec 1, 2018 at 2:10 PM Kevin Babich <kevin.babich at gmail.com>
> wrote:
>
> David,
>
>
>
> Would you be willing to share the implementation? I’d like to plagiarize
> your method for programming the 271.
>
>
>
> Best,
>
> Kevin J. Babich
>
>
>
> 219.406.9707 Mobile
>
>
>
> ***Mobile EMail***
>
>
>
> Please excuse any typos and brevity.
>
>
> On Dec 1, 2018, at 3:50 PM, David Shaw <shawpbx at gmail.com> wrote:
>
> Yes, Both the TM-271 and the TM-D700.
>
>
>
> TM-271a using a Raspberry Pi, USB programming cable and a URI.
>
> TM-D700 old school using the 4 port AllStarLink card that Steve (WA6ZFT)
> and Jim (WB6NIL) designed.
>
>
>
> David
>
>
>
>
>
> --
>
> Thanks, David
>
>
>
> "Laws that forbid the carrying of arms...disarm only those who are neither
> inclined nor determined to commit crimes. Such laws make things worse for
> the assaulted and better for the assailants; they serve rather to encourage
> than prevent homicides, for an unarmed man may be attacked with greater
> confidence than an armed one."
>
> Thomas Jefferson
>
>
>
>
>
> On Fri, Nov 30, 2018 at 3:19 PM Kevin Babich <kevin.babich at gmail.com>
> wrote:
>
> Greetings,
>
>
>
> Has anyone successfully integrated a Kenwood radio into Allstar with full
> Remote Base functionality (frequency, offset, etc.)? If so, can you please
> share which radio was integrated / interfacing / etc.?
>
>
>
> Kindest Regards,
>
>
>
> Kevin Babich | N9IAA
>
> Valparaiso, IN 46383
>
>
>
> Mobile: 219.406.9707
>
>
>
> Cessna 421
>
> Cesssna Conquest I/II
>
> Beechcraft King Air 90/200
>
>
>
> “…It is not the critic who counts; not the man who points out how the
> strong man stumbles, or where the doer of deeds could have done them
> better. The credit belongs to the man who is actually in the arena, whose
> face is marred by dust and sweat and blood; who strives valiantly; who
> errs, who comes short again and again, because there is no effort without
> error and shortcoming; but who does actually strive to do the deeds; who
> knows great enthusiasms, the great devotions; who spends himself in a
> worthy cause; who at the best knows in the end the triumph of high
> achievement, and who at the worst, if he fails, at least fails while daring
> greatly, so that his place shall never be with those cold and timid souls
> who neither know victory nor defeat...” -Theodore Roosevelt
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181203/fc990d9f/attachment.html>
More information about the App_rpt-users
mailing list