[App_rpt-users] Allstarlink newbie

[Marco Brunozzi]

Hi Mike, thanks for the answer.
I started with install armbian on banana m2+ (Linux ir0uas_uhf
3.4.113-sun8i #68 SMP PREEMPT Wed Sep 19 10:23:30 CEST 2018 armv7l
GNU/Linux), after that I had following this instruction:

cd /tmp
wget http://dvswitch.org/install-allstarlink-repository

chmod +x install-allstarlink-repository
./install-allstarlink-repository

If Raspbian: apt-get install raspberrypi-kernel-headers -y

Otherwise: apt-get install linux-headers-`uname -r` -y

apt-get update
apt-get install allstarlink -y

At the end of the installation process, I started the configuration
with the help of startup script.
Attached you can find the configuration files.

73 Marco IW0RED.
On Mon, Dec 3, 2018 at 1:06 AM Mike <mm at midnighteng.com> wrote:
>
> Marco,
>
> I can't make heads or tails of your log.
>
> Perhaps just state what you want to have when done with your server,
>
> what you have completed,
>
> and what is not working.
>
> Be sure to mention the hardware PC or Pi etc usb/radio ports etc.
>
> Probably would not hurt to attach your rpt.conf file with your question
> by the looks of the log.
>
>
> ...mike/kb8jnm
>
>
> On 12/2/2018 10:13 AM, Marco Brunozzi wrote:
> > Hi everyone, I trying to setting up my first asl node. I don't have
> > experiences in this years I had work with svxlink. The migration it's
> > very hard. :-) Below the asterisk log.
> > Thanks in advance.
> > 73 Marco IW0RED.
> >
> > pbx_config.so => (Text Extension Configuration)
> >    == Registered file format ogg_vorbis, extension(s) ogg
> > format_ogg_vorbis.so => (OGG/Vorbis audio)
> >    == Registered channel type 'rtpdir' (RTPDIR Ham Radio Bridging Driver)
> > chan_rtpdir.so => (RTPDIR Ham Radio Bridging Thingy)
> > Asterisk Ready.
> >      -- Loading initial config for repeater 28163
> > [Dec  2 15:43:32] NOTICE[1223]: app_rpt.c:22184 rpt_master: Normal
> > Repeater Init  28163
> >      -- Re-Loading config for repeater 28163
> >      -- rpt (Rx) initiating call to SimpleUSB/usb_28163 on SimpleUSB/usb_28163
> > [Dec  2 15:43:32] WARNING[1227]: channel.c:3051 ast_request: No
> > channel type registered for 'DAHDI'
> > rpt:Sorry unable to obtain pseudo channel
> > [Dec  2 15:43:32] NOTICE[1228]: chan_simpleusb.c:1534 hidthread:
> > Assigned USB device 5-1:1.0 to simpleusb channel usb_28163
> >    == Set device 5-1:1.0 to usb_28163
> > [Dec  2 15:43:32] WARNING[1228]: chan_simpleusb.c:1637 hidthread:
> > Loaded parameters from simpleusb_tune_usb_28163.conf for device
> > usb_28163 .
> >
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



-- 
Marco Brunozzi

Tel. +14152360004
Cel. +393483343274
Skype: marco.brunozzi
Twitter: marcobrunozzi
---------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: asterisk.conf
Type: application/octet-stream
Size: 22 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181204/fffa4b59/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rpt.conf
Type: application/octet-stream
Size: 24741 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20181204/fffa4b59/attachment-0001.obj>