[App_rpt-users] Modules.conf: autoload

[Bob Pyke]

Very good, thanks Mike. 

Bob
K6ECM
73


> On Dec 26, 2018, at 5:12 PM, Mike <mm at midnighteng.com> wrote:
> 
> Bob,
> 
> Use this general Asterisk guide.
> 
> https://wiki.asterisk.org/wiki/display/AST/Configuring+the+Asterisk+Module+Loader
> 
> As far as what modules are needed for some functions... good luck we have no documentation that I know of.
> Much is obvious and self evident.
> If you have a issue on a function or particular module, ask the group.
> 
> ...mike/kb8jnm
> 
>> On 12/26/2018 8:06 PM, Bob Pyke wrote:
>> How does the “autoload” command work in modules.conf, and when would want to say =yes, and =no?
>> 
>> Thanks,
>> Bob
>> K6ECM
>> 73
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.