[App_rpt-users] Raslink vs Dial for RPI

[Pierre Martel]

Ok this will make the decision to buy 2 raspberry pi 3 with 4 sd card easy.

Unless someone tell me that there is a better small computer that could do
the job for my 2 nodes using usbradio.



Le lun. 5 févr. 2018 à 18:04, Bryan Fields <Bryan at bryanfields.net> a écrit :

> On 2/5/18 5:34 PM, Pierre Martel wrote:
> > Yes I knew that dsp is supported on Dial but there was talk that on the
> > raspberry pi it was not as stable as on x86 architecture.
>
> I know of no one having issues running usbradio with current DIAL on the
> RPI3.
>  I have a couple nodes running as such.
>
> That said, I would only run one usbradio interface per RPI3, they are
> simply
> not that powerful.  I use a supermicro Intel atom server for our main Tampa
> site, and it's got 3 repeaters running pciradio and 2 usbradio interfaces
> on it.
>
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180205/6a4ba9e2/attachment.html>