[App_rpt-users] Remote Base telemetry

[Neil k8it]

it sounds like you are trying to send control dtmf via the 6 pin interface.  this is only half the trick. to control the radio use an optional rs232 to usb cable plugged into another usb port.
I use a python script  or bash script or hamlib to send commands to this control port

Thanks
73 Neil Sablatzky  K8IT
Allstar Node 41838 KITLINK
Allstar Node 42087 KITLINK HUB
IRLP Node exp0068
Echolink K8IT-L
WIRES-X K8IT 11479 Room 21479


From: Thomas Moss 
Sent: Friday, February 09, 2018 7:39 PM
To: App_rpt-users at lists.allstarlink.org 
Subject: [App_rpt-users] Remote Base telemetry


I am trying to make a Kenwood TM-D710 work through the extensions.conf phone patch commands to execute a script to command hamlib/rigctl for control of the radio.  


I want to have the audio feedback from the commands to play on the linked allstar node and not transmitted across the remote base radio. The only commands I have been using is rpt/localplay and Playback for the audio feedback. Is there another command which would send the audio to the connected node and not out to the RF side?


I also have read there is a tmd700 module that works with the native remotebase commands. Where would I look to modify commands to adapt it for the tmd710, which appears to have more functionality than I can using hamlib/rigctl.


For information I am running a current DIAL RC1 image on a raspberry 3.


Thanks,
Thomas
KC5KCT


--------------------------------------------------------------------------------


_______________________________________________
App_rpt-users mailing list
App_rpt-users at lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180209/705cd39d/attachment.html>