[App_rpt-users] Raspberry Pi3 model B

[Steve Zingman]

Enable the channel driver in modules.conf

On 2/15/2018 3:05 PM, ARS W5OMR wrote:
>  Ok. Got the Rpi3 going. Got an IP address. Went to editing on the 
> .conf files. I'll tweak rpt.conf later, but everywhere I can find, 
> modules, iax, rpt, extensions all the default '1999' info was replaced 
> with 29655 and even got my node/password set in ... one of the .conf 
> files (not in front of the machine right now).
> So, after all was edited and saved, I plugged in my URIx, got a solid 
> green led , I ran astres.sh and ...
> The green light... Stays solid.  Ugh.
>
> I feel like I've made significant progress, and thanks for all of you 
> guys help before... But I've not had allstar running in about 3 years 
> and I've forgotten more than I think I knew, back then.
>
> I promise... Just a 'bit' more hand-holding, and I have Faith, that 
> when it comes to whatever step I inadvertently left out, I'll smack my 
> forehead and say some colorful metaphors, and kick myself in the 
> keester for forgetting something that I'm sure is going to be "so 
> simple a caveman could do it".
>
> Cavemen are Showoffs... ;-)
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180215/248257e6/attachment.html>