[App_rpt-users] Simulcast buffer value issue

[Sam Skolfield]

Very good, Hayden. Yes, I've been in touch with  Joe about his project from
when he ordered the RTCMs. I was inquiring as to what Jeff was running.
Didn't mean to veer off topic.

On Thu, Feb 15, 2018 at 1:36 PM Hayden Honeywood <haydenph91 at gmail.com>
wrote:

> Starting to drift off topic.... however...
>
> Attached are my simulcast Radio Mobile plots for the two site system I
> have.
>
> Sam - I'm currently using the BG7TBL GPSDO's that are readily available on
> eBay. They give both a 10MHz output and a 1PPS. I then use a board that Joe
> KC2IRV developed that uses a 10MHz signal from the GPS to control the VTune
> pin on a 9.6MHz OCXO.
>
> http://rtcmsimulcast.wikifoundry.com/page/9.6+MHz+PLL+Circuit+for+RTCM
>
> Back to the one of the topics of the thread -
> I was driving home within the overlap area of the sites again, and noticed
> that extra "audio delay" to my secondary site. The audio starts first on
> the main site, few words later, the audio starts on the secondary site...
> it's quite weird...
> Can I attach MP3's to the list here? I might try to obtain an example.
>
> The variable delay on unkeying is still a problem too.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.

-- 
KJ6QFS
Sam Skolfield
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180215/c7a7dba9/attachment.html>