[App_rpt-users] Simulcast buffer value issue

[Tim Sawyer]

It was only being used for clocking the RTCM. I believe the problem is
power circuitry radiates bunches of hash and trash. It was interfering with
something on VHF high band, like 173.050.. somewhere near there.

On Thu, Feb 15, 2018 at 3:41 PM, Bryan Fields <Bryan at bryanfields.net> wrote:

> On 2/15/18 6:30 PM, Tim Sawyer wrote:
> > Sorry to say this, but those are the bad external clock source I
> mentioned in
> > another post.They are also very dirty. I know one person who's equipment
> was
> > turned off by the site manager due to PCGM interferance.
>
> Well for setting the 9.6 MHz clock onthe RTCM, it's likely ok.  Using it
> for
> the PLL reference would not be advised unless you look at it and it's
> clean.
>
> I've never used them for that.
>
>
>
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180215/5217a04e/attachment.html>