[App_rpt-users] Simulcast buffer value issue

[Jesse Lloyd]

I should add to my last post that I use a dual NIC server. One RTCM is connected directly to the server to provide timing only. The other NIC ties to the network with the other RTCM's that have radios attached. 

Cheers,
Jesse

> On Feb 22, 2018, at 6:43 AM, ARS W5OMR <ars.w5omr at gmail.com> wrote:
> 
> That's probably a latency in the audio section of the PC being used.
> 
> A buddy had the same issues while operating his HF station, remote. After a few minutes, the latency grew and grew.... He used WWV (he lives in West Central OK) as a time base... 
> 
> His solution was to get a more "robust" (read: Turtle Beach) sound card. This was in his desktop at the house.
> 
> It might not be a software problem, as much as a Hardware issue.
> 
> I don't remember if you said this was on an RTCM or not but I know one is involved.
> 
> I believe I would check more on all audio devices involved.
> 
> 
>> On Feb 22, 2018 12:11 AM, "Hayden Honeywood" <haydenph91 at gmail.com> wrote:
>> I've made a YouTube video with clips from a single conversation I had this morning on the repeater. The audio was recorded on my dashcam.
>> 
>> As can be heard in the video, when I start the conversation, the audio delay is nil, or very little when unkeying. However, by the time I'm finished (I think the conversation lasted about 20 minutes) the audio delay is out to 4 or 5 words!
>> 
>> We were both using the same repeater. We have a repeater linked in from another location. I've noticed when talking to someone via that method, the audio delay issue does not build up so quickly.
>> 
>> Hopefully this explains a bit better the issue I'm having.
>> 
>> https://youtu.be/KG3GgaHVWbI
>> 
>> Regards
>> Hayden VK7HH
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180222/6e19db3e/attachment.html>