[App_rpt-users] Simulcast buffer value issue

[Sam Nabkey]

I have been battling a similar issue with 3 RTCM units in mixed mode, not
voted, miles apart on different frequencies.

It's not a sound card issue.  The sound card doesn't come into play on a
voted system.

What seemed to fix mine, was to move the buflen command into the node
stanza in voter.conf.  I haven't confirmed it yet but it seems to be the
case.

Not even sure if that is even an issue on voted systems but I thought I'd
put in my whole two cents.

Sam
k8sn

On Feb 22, 2018 09:43, "ARS W5OMR" <ars.w5omr at gmail.com> wrote:

> That's probably a latency in the audio section of the PC being used.
>
> A buddy had the same issues while operating his HF station, remote. After
> a few minutes, the latency grew and grew.... He used WWV (he lives in West
> Central OK) as a time base...
>
> His solution was to get a more "robust" (read: Turtle Beach) sound card.
> This was in his desktop at the house.
>
> It might not be a software problem, as much as a Hardware issue.
>
> I don't remember if you said this was on an RTCM or not but I know one is
> involved.
>
> I believe I would check more on all audio devices involved.
>
>
> On Feb 22, 2018 12:11 AM, "Hayden Honeywood" <haydenph91 at gmail.com> wrote:
>
>> I've made a YouTube video with clips from a single conversation I had
>> this morning on the repeater. The audio was recorded on my dashcam.
>>
>> As can be heard in the video, when I start the conversation, the audio
>> delay is nil, or very little when unkeying. However, by the time I'm
>> finished (I think the conversation lasted about 20 minutes) the audio delay
>> is out to 4 or 5 words!
>>
>> We were both using the same repeater. We have a repeater linked in from
>> another location. I've noticed when talking to someone via that method, the
>> audio delay issue does not build up so quickly.
>>
>> Hopefully this explains a bit better the issue I'm having.
>>
>> https://youtu.be/KG3GgaHVWbI
>>
>> Regards
>> Hayden VK7HH
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180222/1617ce24/attachment.html>