[App_rpt-users] RTCM underwater audio...

[Sam Nabkey]

No.  That's not the case.  I suspect a timing issue or something.

On Feb 23, 2018 20:35, "Tim Sawyer" <tisawyer at gmail.com> wrote:

> Because you said there was a "reverb mess". I'm thinking there is a spur
> causing one radio to hear the other and cause the echo loop.
>
> On Wed, Feb 21, 2018 at 5:52 PM, Sam Nabkey <sam.nabkey at gmail.com> wrote:
>
>> Motorola GM300 and a Motorola Mitrek.
>>
>> Now you have me wondering why that would matter?
>>
>> On Feb 21, 2018 19:26, "Tim Sawyer" <tisawyer at gmail.com> wrote:
>>
>>> What kind of radios are you using?
>>>
>>> On Tue, Feb 20, 2018 at 6:25 PM, Sam Nabkey <sam.nabkey at gmail.com>
>>> wrote:
>>>
>>>> Yes... different freq's different areas...
>>>>
>>>> On Tue, Feb 20, 2018 at 9:21 PM, Chuck Henderson <
>>>> rpt2 at chuck.midlandsnetworking.com> wrote:
>>>>
>>>>> Do you have the 2 RTCM's on different frequencies or using different
>>>>> tones?
>>>>> You can't mix 2 RTCM's that are listening to the same frequency but
>>>>> not using GPS as they will have different and varying delays.
>>>>> Chuck
>>>>>
>>>>> On Tue, Feb 20, 2018 at 7:46 PM, Sam Nabkey <sam.nabkey at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hello Group!
>>>>>>
>>>>>> Running latest DIAL image, and updated.
>>>>>>
>>>>>> Two RTCM's running as Mixed.
>>>>>>
>>>>>> Both RTCM's  will break into a underwater sounding reverbed mess all
>>>>>> of a sudden, but not always at the same time. S tarts out small and gets
>>>>>> worse the longer the transmitter is keyed.. After the PTT stops, everything
>>>>>> returns to normal until it starts again.  No pattern,  no reason...
>>>>>> changed buffer settings on both ends. no joy..  any ideas?
>>>>>>
>>>>>> Sam
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>>> press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>>> the list detailing the problem.
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>> press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>> the list detailing the problem.
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>>
>>>
>>> --
>>> Tim WD6AWP
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> --
> Tim WD6AWP
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180223/97e68033/attachment.html>