[App_rpt-users] RTCM underwater audio...

Sun Feb 25 04:52:42 UTC 2018

What is the computer?

There is no GPS involved, right?

Do you see any messages on the Asterisk CLI or when telnet'd to the RTCMs
when this happens?

Buffer settings need to be at least 1200 and 250.

What do you get from voter ping?

On Fri, Feb 23, 2018 at 5:43 PM, Sam Nabkey <sam.nabkey at gmail.com> wrote:

> No.  That's not the case.  I suspect a timing issue or something.
>
> On Feb 23, 2018 20:35, "Tim Sawyer" <tisawyer at gmail.com> wrote:
>
>> Because you said there was a "reverb mess". I'm thinking there is a spur
>> causing one radio to hear the other and cause the echo loop.
>>
>> On Wed, Feb 21, 2018 at 5:52 PM, Sam Nabkey <sam.nabkey at gmail.com> wrote:
>>
>>> Motorola GM300 and a Motorola Mitrek.
>>>
>>> Now you have me wondering why that would matter?
>>>
>>> On Feb 21, 2018 19:26, "Tim Sawyer" <tisawyer at gmail.com> wrote:
>>>
>>>> What kind of radios are you using?
>>>>
>>>> On Tue, Feb 20, 2018 at 6:25 PM, Sam Nabkey <sam.nabkey at gmail.com>
>>>> wrote:
>>>>
>>>>> Yes... different freq's different areas...
>>>>>
>>>>> On Tue, Feb 20, 2018 at 9:21 PM, Chuck Henderson <
>>>>> rpt2 at chuck.midlandsnetworking.com> wrote:
>>>>>
>>>>>> Do you have the 2 RTCM's on different frequencies or using different
>>>>>> tones?
>>>>>> You can't mix 2 RTCM's that are listening to the same frequency but
>>>>>> not using GPS as they will have different and varying delays.
>>>>>> Chuck
>>>>>>
>>>>>> On Tue, Feb 20, 2018 at 7:46 PM, Sam Nabkey <sam.nabkey at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Group!
>>>>>>>
>>>>>>> Running latest DIAL image, and updated.
>>>>>>>
>>>>>>> Two RTCM's running as Mixed.
>>>>>>>
>>>>>>> Both RTCM's  will break into a underwater sounding reverbed mess all
>>>>>>> of a sudden, but not always at the same time. S tarts out small and gets
>>>>>>> worse the longer the transmitter is keyed.. After the PTT stops, everything
>>>>>>> returns to normal until it starts again.  No pattern,  no reason...
>>>>>>> changed buffer settings on both ends. no joy..  any ideas?
>>>>>>>
>>>>>>> Sam
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>
>>>>>>> To unsubscribe from this list please visit
>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>>>> press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>>>> the list detailing the problem.
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>
>>>>>> To unsubscribe from this list please visit
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>>> press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>>> the list detailing the problem.
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> and scroll down to the bottom of the page. Enter your email address and
>>>>> press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email
>>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>>> the list detailing the problem.
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Tim WD6AWP
>>>>
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>
>>>> To unsubscribe from this list please visit
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> and scroll down to the bottom of the page. Enter your email address and
>>>> press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email
>>>> confirmation. If you have trouble unsubscribing, please send a message to
>>>> the list detailing the problem.
>>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>>> scroll down to the bottom of the page. Enter your email address and press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>>
>>
>> --
>> Tim WD6AWP
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit http://lists.allstarlink.org/c
>> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
>> the page. Enter your email address and press the "Unsubscribe or edit
>> options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/
> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of
> the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>

-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180224/17448788/attachment.html>