[App_rpt-users] Total list of all Allstar commands

[Steve Zingman]

The sample rpt.conf that is included with AllStarLink Asterisk is my 
attempt to include each command available. For the numbering system, 
except for a few commands, there is no standard. That is up to the node 
operator. The sample rpt.conf is at 
<https://github.com/AllStarLink/DIAL/blob/master/configs/rpt.conf> I'm 
sure I missed something. I would not be surprised if there are errors. 
As people point them out I'll make edits. We are working to fill out the 
wiki as the place to go for all things AllStarLink  at 
<http://wiki.allstarlink.org/wiki/Main_Page>

73, Steve N4IRS

On 1/5/2018 3:31 AM, larry wrote:
> Can some one point me to a listing of every available command defined 
> that can used with Allstar.
>
> I am have a heck of a time trying to configure my nodes so everything 
> is all the same commands on all my nodes..
> It seems whenever there is a different version other than the 1-5 
> ilink commands there is no standard numbering system between versions 
> or platforms.
> Realizing that it is up to me to standardize my own system I am about 
> to start from scratch eliminating all the jumble.
> It would certainly be helpful if there was a COMPLETE command list 
> with explanations of their functions.
>
> Larry - N7FM
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.