[App_rpt-users] Registration issue

[Steve Zingman]

Lu,
Did you add the statpost lines in the second node stanza?

statpost_program = 
/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
statpost_url = http://stats.allstarlink.org/uhandler.php ; Status updates


On 1/16/2018 3:55 PM, Lu V wrote:
>
> I need a refresher. If I add a second URI / node # to an existing 
> node, do I have to put the second node on another port other than the 
> default 4569?  Or can the both be on the same port as long as they are 
> on the same box?  Also, I see that the node 27877 is registered and 
> active when I perform an IAX2 show registry but when I look on the 
> status page (stats.allstarlinkg.org <http://stats.allstarlinkg.org/>) 
> it does not show up. I have it 24 hours and it still is not showing up.
>
> So to summarize,  the current node that has been and still is working 
> is 27870,  and adding 27877 to the same box, I can’t seem to get it to 
> show up on the status page but yet it shows registered on the same box.
>
> Any ideas?
>
> Lu Vencl
> KA4EPS
>
>
>
> Sent from my iPhone, Lu Vencl
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180116/8d74b619/attachment.html>