[App_rpt-users] strangle garbling on second node

[Pierre Martel]

I have my nodes 27821 and 28739, they use to run on an old P4.

The nodes are on UsbRadio and the levels have been adjusted on with an
IFR1500 so they are inline.

I switched computer yesterday and now I use a Proliant G5P computer on
Stretch.

Got some help to make it run but all seem prety well. I also run
chan_echolink with chan_usbradio.

the drive is aN SSD, got 8 gig of ram and the cpu is an 8 core xeon at 2.2
ghz.

I also use the Raid controler to have a 1 TB raid 1 array.

If I run the GUI ( Mate)  or only CLI ( init level 3) it still the same. I
tested on the same usb bus or different usb bus and it make no difference

here is the outpu of lsusb

 lsusb
Bus 005 Device 002: ID 03f0:1027 Hewlett-Packard Virtual keyboard and mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 010: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio
Controller
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 014: ID 0d8c:013a C-Media Electronics, Inc.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

I use 2 URI. they are not modded fob.

I switched usb cable.

I used iaxrpt to connect to both repeater and I got that in the log of
asterisk:

 WARNING[9017]: chan_iax2.c:921 jb_warning_output: Resyncing the jb.
last_delay -98, this delay 2918, threshold 1164, new offset -2918

and we receive a lot of hungup message for only one short ptt:

 -- Hungup 'DAHDI/pseudo-1302878576'
    -- Hungup 'DAHDI/pseudo-1313783111'
    -- Hungup 'DAHDI/pseudo-1265694909'
    -- Hungup 'DAHDI/pseudo-1223961614'
    -- Hungup 'DAHDI/pseudo-1745973833'
    -- Hungup 'DAHDI/pseudo-311499195'
    -- Hungup 'DAHDI/pseudo-1573868247'
    -- Hungup 'DAHDI/pseudo-56935586'
    -- Hungup 'DAHDI/pseudo-267958833'
    -- Hungup 'DAHDI/pseudo-580580533'
    -- Hungup 'DAHDI/pseudo-1976922523'

Even with an echolink connection there are multiple Hungup 'DAHDI/pseudo
messages in the log for only one tx.

Anyone can help?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180121/da7f6aa0/attachment.html>