[App_rpt-users] RE RPI3 B+ SETUP

[Mike]

Jon,

You will need to edit /etc/ssh/sshd_conf

and set allow web access to "YES" to access this freely from 
putty/winscp/filezilla.

save and restart ssh

Just as long as you know the security implications.

Sure save ya a lot of work set'n'm up though !

...mike/kb8jnm


On 7/1/2018 8:52 PM, Redbutton_Ctrl wrote:
> ?/Its been a while since I setup an node on rpi.
>
> Noe I'm trying to setup on rpi 3b+ with the  latest image. 
> (ASL_1.01-20180228)
>
> I burned a sd card but the Rpi doesnt seem to connect to the router so 
> can ssh in to it.
>
> Hooked up a monitor and managed to get as far as to change password.
>
> now what?
>
> Is there a new manual to node set up and if so where is it located?
>
> Cant seem to find any instructions.
>
> The old image I used for rpi 2s seemed to work right out of the gate.
>
> Can someone point me in the right direction?
>
> Thanks,
>
> Jon VA3RQ
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.