[App_rpt-users] RE RPI3 B+ SETUP

[Redbutton_Ctrl]

Ok well my first problem was a bad lan cable so no connectivity to router.

Got that sorted out.

things are starting to work.

thanks.


RQ


On 7/1/2018 9:16 PM, Steve Zingman wrote:
> Jon,
> Run asl-menu. ssh should be running.
>
> On 07/01/2018 08:52 PM, Redbutton_Ctrl wrote:
>> ?/Its been a while since I setup an node on rpi.
>>
>> Noe I'm trying to setup on rpi 3b+ with the  latest image. 
>> (ASL_1.01-20180228)
>>
>> I burned a sd card but the Rpi doesnt seem to connect to the router 
>> so can ssh in to it.
>>
>> Hooked up a monitor and managed to get as far as to change password.
>>
>> now what?
>>
>> Is there a new manual to node set up and if so where is it located?
>>
>> Cant seem to find any instructions.
>>
>> The old image I used for rpi 2s seemed to work right out of the gate.
>>
>> Can someone point me in the right direction?
>>
>> Thanks,
>>
>> Jon VA3RQ
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem. 
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.