[App_rpt-users] Ask 1.01

Bryan Taylor overnite at me.com
Mon Jul 2 15:32:35 UTC 2018


Vfs: mounted root ext4 file system readonly on device......

Now why would that happen I wonder....

Getting closer thanks for the tips...

Sent from my iPhone

> On Jul. 2, 2018, at 12:57 p.m., Mike <mm at midnighteng.com> wrote:
> 
> That sounds like a more reasonable explanation.
> 
> ...mike/kb8jnm
> 
> 
>> On 7/2/2018 11:26 AM, Bryan Taylor wrote:
>> I also installed a program before the last reboot and that has disappeared too...
>> 
>> Almost like sd card is in readonly mode... anything written to sd card is flushed after a reboot
>> 
>> Sent from my iPhone
>> 
>>> On Jul. 2, 2018, at 12:49 p.m., Mike <mm at midnighteng.com> wrote:
>>> 
>>> For a test ...
>>> 
>>> try renaming "node-setup" to 'node-setup-bu'
>>> 
>>> in     /usr/local/sbin
>>> 
>>> If it stops good but you still need to find where it is loading from.
>>> 
>>> If it has no effect, don't forget to change the name back.
>>> 
>>> ...mike/kb8jnm
>>> 
>>> 
>>>> On 7/2/2018 11:12 AM, Bryan Taylor wrote:
>>>> Searching through here now looking for an option...has to be something reloading config files from some backup from the initial install, haven’t located it yet. I can edit them and get the node running until it reboots then it reverts back to older config files
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On Jul. 2, 2018, at 12:40 p.m., Mike <mm at midnighteng.com> wrote:
>>>>> 
>>>>> 
>>>>> I could be wrong, but the behavior sounds like you are downloading the config files from allstar.org.
>>>>> 
>>>>> How you are doing that would be unknown. But i think that is what you need to look for.
>>>>> 
>>>>> It will not do that automatically on it's own as I know it to be. Some other script invoking that ?
>>>>> 
>>>>> ...mike/kb8jnm
>>>>> 
>>>>> 
>>>>>> On 7/2/2018 11:05 AM, Bryan Taylor wrote:
>>>>>> Question about version 1.01,
>>>>>> 
>>>>>> I have one here that automatically rewrites the configuration files, ssh port keeps resetting to default, for.conf keeps reverting to a copy that has errors in it, manager.conf keeps getting replaced...
>>>>>> 
>>>>>> What function or script do I need to shutoff to keep it from overwriting the config files with what appears to be a backup copy...
>>>>>> 
>>>>>> Thanks
>>>>>> Bryan
>>>>>> Vo1mxz
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> 
>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.



More information about the App_rpt-users mailing list