[App_rpt-users] Ask 1.01

[Bryan Taylor]

Looks like sd card is hosed, it’s running for now until another reboot. Will have to reinstall it on another card and give it a go.

FYI: it’s a 16 gig Pny card, the only card in our setup that isn’t a sandisk ultra. This will be second time the Pny card has had trouble. The other 13-14 machines all use sandisk ultra’s...

Thanks for the help
Bryan
Vo1mxz

Sent from my iPhone

> On Jul. 2, 2018, at 1:44 p.m., Mike <mm at midnighteng.com> wrote:
> 
> Sorry, I am unable to follow you on this to check.
> 
> All of my pi's are in use and my ASL image is amuck,
> 
> After booting, you may need to enable write mode manually and put your files on manually.
> 
> But it sounds like the image is a bit messed up.
> 
> You might want to try downloading anew and try again on a different sd if you have it.
> 
> Perhaps also check that the pi is able to get the required (enough) current and that it's cpu isn't getting to hot,
> 
> especially during a install. Just things to check/do.
> 
> ...mike/kb8jnm
> 
> 
>> On 7/2/2018 11:32 AM, Bryan Taylor wrote:
>> Vfs: mounted root ext4 file system readonly on device......
>> 
>> Now why would that happen I wonder....
>> 
>> Getting closer thanks for the tips...
>> 
>> Sent from my iPhone
>> 
>>> On Jul. 2, 2018, at 12:57 p.m., Mike <mm at midnighteng.com> wrote:
>>> 
>>> That sounds like a more reasonable explanation.
>>> 
>>> ...mike/kb8jnm
>>> 
>>> 
>>>> On 7/2/2018 11:26 AM, Bryan Taylor wrote:
>>>> I also installed a program before the last reboot and that has disappeared too...
>>>> 
>>>> Almost like sd card is in readonly mode... anything written to sd card is flushed after a reboot
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>>> On Jul. 2, 2018, at 12:49 p.m., Mike <mm at midnighteng.com> wrote:
>>>>> 
>>>>> For a test ...
>>>>> 
>>>>> try renaming "node-setup" to 'node-setup-bu'
>>>>> 
>>>>> in     /usr/local/sbin
>>>>> 
>>>>> If it stops good but you still need to find where it is loading from.
>>>>> 
>>>>> If it has no effect, don't forget to change the name back.
>>>>> 
>>>>> ...mike/kb8jnm
>>>>> 
>>>>> 
>>>>>> On 7/2/2018 11:12 AM, Bryan Taylor wrote:
>>>>>> Searching through here now looking for an option...has to be something reloading config files from some backup from the initial install, haven’t located it yet. I can edit them and get the node running until it reboots then it reverts back to older config files
>>>>>> 
>>>>>> Sent from my iPhone
>>>>>> 
>>>>>>> On Jul. 2, 2018, at 12:40 p.m., Mike <mm at midnighteng.com> wrote:
>>>>>>> 
>>>>>>> 
>>>>>>> I could be wrong, but the behavior sounds like you are downloading the config files from allstar.org.
>>>>>>> 
>>>>>>> How you are doing that would be unknown. But i think that is what you need to look for.
>>>>>>> 
>>>>>>> It will not do that automatically on it's own as I know it to be. Some other script invoking that ?
>>>>>>> 
>>>>>>> ...mike/kb8jnm
>>>>>>> 
>>>>>>> 
>>>>>>>> On 7/2/2018 11:05 AM, Bryan Taylor wrote:
>>>>>>>> Question about version 1.01,
>>>>>>>> 
>>>>>>>> I have one here that automatically rewrites the configuration files, ssh port keeps resetting to default, for.conf keeps reverting to a copy that has errors in it, manager.conf keeps getting replaced...
>>>>>>>> 
>>>>>>>> What function or script do I need to shutoff to keep it from overwriting the config files with what appears to be a backup copy...
>>>>>>>> 
>>>>>>>> Thanks
>>>>>>>> Bryan
>>>>>>>> Vo1mxz
>>>>>>>> _______________________________________________
>>>>>>>> App_rpt-users mailing list
>>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>> 
>>>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>> 
>>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>>> _______________________________________________
>>>>>> App_rpt-users mailing list
>>>>>> App_rpt-users at lists.allstarlink.org
>>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>> 
>>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at lists.allstarlink.org
>>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>> 
>>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at lists.allstarlink.org
>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.