[App_rpt-users] URI-X Issues With New Raspbian build

[JJC]

So that is to say that I did a clean build (minimal) using the latest
raspbian... followed the simple directions here:
https://wiki.allstarlink.org/wiki/ASL_FAQ and ASL started up... (other than
ASL recognizing the URI per the original post)... as one of the
troubleshooting steps I reinstalled the raspberrypi-kernel-headers which
broke dahdi and that's where I am now.. a broken dahdi install

On Mon, Jul 9, 2018 at 8:08 AM JJC <cummingsj at gmail.com> wrote:

> Yeah but I didn’t use the image, I used your apt repo
>
> Sent from the iRoad
>
> > On Jul 9, 2018, at 07:31, Steve Zingman <szingman at msgstor.com> wrote:
> >
> > <
> http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228-armhf-raspbian-stretch-image.readme
> >
> > Also included in the zip.
> >
> >> On 7/9/2018 9:20 AM, JJC wrote:
> >> I didn’t see the requirement to hold those in any of the documentation
> that I read, maybe I just overlooked it....
> >>
> >> I’ll see what I can do today to fix the new (dahdi) issues.... and then
> the dsp issue....
> >>
> >> Sent from the iRoad
> >>
> >>>> On Jul 9, 2018, at 07:06, Bryan Fields <Bryan at bryanfields.net> wrote:
> >>>>
> >>>> On 7/8/18 12:44 AM, JJC wrote:
> >>>> Didi a fresh install of the latest ASL from the repo on a fresh
> install of
> >>>> raspbian on an RPI 3.  The issue is simple... the pi sees the URI but
> ASL
> >>>> seems to have issues..
> >>> Did you follow the readme and do:
> >>> sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel ?
> >>>
> >>>> I have included sample output from a variety of commands below which
> >>>> clearly details the underlying OS sees the URI as it should, and the
> given
> >>>> address etc...
> >>>>
> >>>> see the example output below...
> >>>>
> >>>> taken from /var/log/asterisk/messages
> >>>> [Jul  7 22:19:46] WARNING[6703] chan_usbradio.c: Loaded parameters
> from
> >>>> usbradio_tune_usb.conf for device usb .
> >>>> [Jul  7 22:19:46] WARNING[6703] chan_usbradio.c: Unable to re-open DSP
> >>>> device 1 (usb): No such file or directory
> >>> Yea, newest raspbian removed the support for /dev/dsp (OSS) in the
> stock
> >>> kernel.  Holding back the old kernel will prevent you from needing to
> >>> recompile the "new" kernel to get OSS back in it.  The wrapper will
> not work
> >>> as the modules depend on this.
> >>>
> >>> Sorry for the delay, been traveling :(
> >>>
> >>> --
> >>> Bryan Fields
> >>>
> >>> 727-409-1194 - Voice
> >>> http://bryanfields.net
> >>> _______________________________________________
> >>> App_rpt-users mailing list
> >>> App_rpt-users at lists.allstarlink.org
> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>>
> >>> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >>> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users at lists.allstarlink.org
> >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
> >> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> >> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at lists.allstarlink.org
> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180709/bf31f83c/attachment.html>