[App_rpt-users] IAXRPT

[Mike Besemer - WM4B]

Just saw this.

I got my butt kicked by that too!

Mike
WM4B


On Fri, Jul 13, 2018 at 1:44 PM, Russell Thomas wrote:

> Someone called me in regards to the post and after some
> troubleshooting it appears I didn't need to use special characters in
> the password.
>
> Thanks everyone!!
>
>
> 73,
> Russell Thomas, KV4S
>
> Cell: 205.202.1701
> DMR: 3101393
> D-Star: KV4S
> AllStar: 47923
> EchoLink: KV4S-L (1003254)
> HamShackHotline: 614
> Web: http://KV4S.com
>
>
> On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm at midnighteng.com> wrote:
>> Well,
>>
>> I'm going to bet you left a set-up set out.
>>
>> Look in your extentions.conf
>>
>> The below works if you define what node, node1 and node2 are
>>
>> [globals]
>> HOMENPA = 330 ; change this to your Area Code
>> NODE = 48396   ; change this to your node number
>> NODE1 = 1999
>> NODE2 = 1010
>> NODE3 = 1020
>>
>> [iaxrpt]
>> exten => ${NODE},1,rpt(${NODE}|X)
>> exten => ${NODE1},1,rpt(${NODE1}|X)
>> exten => ${NODE2},1,rpt(${NODE2}|X)
>>
>>
>> Otherwise
>>
>> define them exact like this
>>
>> [iaxrpt]
>>
>> exten => 48396,1,rpt(48396}|X)
>>
>>
>> I showed both ways since when you look at the default settings in the 
>> file,
>> you may see it listed either way.
>>
>> Can be confusing to those that do not know.
>>
>> Just so you understand the difference since the top one has been 
>> defined as
>> a variable.
>>
>> Also make sure the 'context' is correct and your password in iax.conf
>>
>> Also, if you are using poerts 4570, or outside the normal/default, 
>> you will
>> need to include that in your
>>
>> iaxrpt program connection data 'HOST' for the account like...
>>
>> 192.168.1.222:4570
>>
>> .That should get you somewhere !
>>
>> ...mike/kb8jnm
>>
>>
>>
>> On 7/13/2018 12:16 PM, Russell Thomas wrote:
>>>
>>> Looking for some help setting up IAXPRT on our club's AWS ASL node.
>>>
>>> I edited the iax.conf and the extensions.conf. I made sure the IAX
>>> ports were open on the AWS instance.
>>>
>>> When I try connecting from the Windows client it says calling and 
>>> the
>>> state has a "?" in it. Eventually it drops out.
>>>
>>> Any ideas?
>>>
>>>
>>> 73,
>>> Russell Thomas, KV4S
>>>
>>> Cell: 205.202.1701
>>> DMR: 3101393
>>> D-Star: KV4S
>>> AllStar: 47923
>>> EchoLink: KV4S-L (1003254)
>>> HamShackHotline: 614
>>> Web: http://KV4S.com
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>>> and
>>> scroll down to the bottom of the page. Enter your email address and 
>>> press
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a 
>>> message to
>>> the list detailing the problem.
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and
>> scroll down to the bottom of the page. Enter your email address and 
>> press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to
>> the list detailing the problem.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
> and scroll down to the bottom of the page. Enter your email address 
> and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem.