[App_rpt-users] IAXRPT

[Russell Thomas]

Someone called me in regards to the post and after some
troubleshooting it appears I didn't need to use special characters in
the password.

Thanks everyone!!


73,
Russell Thomas, KV4S

Cell: 205.202.1701
DMR: 3101393
D-Star: KV4S
AllStar: 47923
EchoLink: KV4S-L (1003254)
HamShackHotline: 614
Web: http://KV4S.com


On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm at midnighteng.com> wrote:
> Well,
>
> I'm going to bet you left a set-up set out.
>
> Look in your extentions.conf
>
> The below works if you define what node, node1 and node2 are
>
> [globals]
> HOMENPA = 330 ; change this to your Area Code
> NODE = 48396   ; change this to your node number
> NODE1 = 1999
> NODE2 = 1010
> NODE3 = 1020
>
> [iaxrpt]
> exten => ${NODE},1,rpt(${NODE}|X)
> exten => ${NODE1},1,rpt(${NODE1}|X)
> exten => ${NODE2},1,rpt(${NODE2}|X)
>
>
> Otherwise
>
> define them exact like this
>
> [iaxrpt]
>
> exten => 48396,1,rpt(48396}|X)
>
>
> I showed both ways since when you look at the default settings in the file,
> you may see it listed either way.
>
> Can be confusing to those that do not know.
>
> Just so you understand the difference since the top one has been defined as
> a variable.
>
> Also make sure the 'context' is correct and your password in iax.conf
>
> Also, if you are using poerts 4570, or outside the normal/default, you will
> need to include that in your
>
> iaxrpt program connection data 'HOST' for the account like...
>
> 192.168.1.222:4570
>
> .That should get you somewhere !
>
> ...mike/kb8jnm
>
>
>
> On 7/13/2018 12:16 PM, Russell Thomas wrote:
>>
>> Looking for some help setting up IAXPRT on our club's AWS ASL node.
>>
>> I edited the iax.conf and the extensions.conf. I made sure the IAX
>> ports were open on the AWS instance.
>>
>> When I try connecting from the Windows client it says calling and the
>> state has a "?" in it. Eventually it drops out.
>>
>> Any ideas?
>>
>>
>> 73,
>> Russell Thomas, KV4S
>>
>> Cell: 205.202.1701
>> DMR: 3101393
>> D-Star: KV4S
>> AllStar: 47923
>> EchoLink: KV4S-L (1003254)
>> HamShackHotline: 614
>> Web: http://KV4S.com
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
>> scroll down to the bottom of the page. Enter your email address and press
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.