[App_rpt-users] Upgrade from Dial to ASL distro.

[Mike]

I might also ask if you used usbradio / simpleusb .confs anew or used 
your old ones ?

But check permissions on your config files first.

If still a issue,

You might also send me (off list) your rpt.conf and usbradio/simpleusb 
files (which ever you use).

...mike/kb8jnm


On 07/16/2018 11:44 PM, Mike wrote:
>
> Check permissions and any special folders you may have created for 
> scripts you are calling along with those files.
>
> for starters...
>
> I am just checking with you in a step by step. I had a strange 
> incidence but I doubt this is the same as mine so rather than run you 
> on some wild theory... one step at a time.
>
>
> Yes, I did copy my files over to the new debian from acid. It does work.
>
> ...mike/kb8jnm
>
>
> On 07/16/2018 11:28 PM, k7ilo1 at gmail.com wrote:
>>
>> I actually copied them all into the Asterisk folder and then the node 
>> became inoperable.
>>
>> *From:*App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> 
>> *On Behalf Of *Mike
>> *Sent:* Monday, July 16, 2018 7:13 PM
>> *To:* app_rpt-users at lists.allstarlink.org
>> *Subject:* Re: [App_rpt-users] Upgrade from Dial to ASL distro.
>>
>> Did you import "ALL' of your old *.conf files, or just some ?
>>
>> ...mike/kb8jnm
>>
>> On 07/16/2018 10:04 PM, k7ilo1 at gmail.com <mailto:k7ilo1 at gmail.com> wrote:
>>
>>     So this has probably already been answered and forgive me if it has.
>>
>>     I have a problem with reading through the crap load of emails I
>>     have. And I mean a CRAP load.
>>
>>     1^st .  What’s the advantage (differences) to moving to the ASL
>>     distro that’s posted compared to the DIAL distro?
>>
>>     2^nd . Is there an upgrade path from the 1 to the other?
>>
>>     3^rd . I do have a hard drive where I installed the ASL version
>>     and called myself importing my settings.
>>
>>     My node is working well as a standard repeater but I am not
>>     registering with the ALLSTAR network and the node is not
>>     responding to ANY DTMF commands, including status, id, or any
>>     other local commands.
>>
>>     It transmits periodically like its id’ing but no sound.  My audio
>>     is setup because ive used the echo function and that’s working
>>     properly and audio, deviation and all of the cool repeater
>>     settings are clean
>>
>>     Where do I need to start looking for these couple of issues?
>>
>>     I am back online now because I put the DIAL release hard drive
>>     back in just to be accessible for the time being.
>>
>>     Thanks all
>>
>>     Harold
>>
>>     K7ILO
>>
>>
>>
>>
>>     _______________________________________________
>>
>>     App_rpt-users mailing list
>>
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180716/08e99706/attachment.html>