[App_rpt-users] Simplex node problem

[Tim Sawyer]

The command complete (touch tone accepted) beep is different from the
courtesy tone. Is the beep the same as the courtesy tone?

A common reason for no touch tone decoding with a simplex node is when the
node is in (the default) full duplex. Be sure you have a duplex=0 statement
in (usually near the top) your node stanza.


On Wed, Jul 11, 2018 at 11:39 AM Jay Poulos <osu49er at gmail.com> wrote:

> I have a simplex node setup with a Baofeng 888.  I receive ok (the
> periodic automated date and time)  but  when I transmit a command,  I just
> hear a beep.  On the Node Status page the "Total Keyups" increments each
> time I attempt to send a command.  However,  the "Total Commands Executed"
> remains at 0.  "Total Timeouts" is also 0.  It's as if the command is being
> received but not interpreted correctly?  Any ideas?
>
>
>
> Thanks,
>
> Jay
>
> KI7SOX
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.



-- 
Tim WD6AWP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180718/7b3bf8db/attachment.html>