[App_rpt-users] Simplex node problem

[Mike]

Reading your whole and previous message Jay,


I'm guessing you are not seeing results from your command ???
A successful command will at least give you a short kinda 'double 
beep'... bip bip even when being issued via sched/macro if the tx is up.

But one of the first things to look for if you are having issues getting 
results from a command is to look for a conflicting commend in your set-up.
Asterisk will always use the first match it can make anywhere in the 
channel/stanza it can.
So if you had these commands
97
971

971 will never execute since 97 will get it first.
So if you then convert all 97 commands to 3 digits
970
971

Would fix this problem

Just something to look for.
One other thing is that if you are issuing a command for a shell script cmd=
make sure the path is correct and permissions for the file are correct

hope that leads you somewhere but I'm not sure I fully understand your 
issue.
from the console or a ssh window, type '   asterisk -r -vvv   ' ( - 
three v's) to see how asterisk is responding to your commands.

...mike/kb8jnm

On 07/18/2018 09:36 AM, Tim Sawyer wrote:
> The command complete (touch tone accepted) beep is different from the 
> courtesy tone. Is the beep the same as the courtesy tone?
>
> A common reason for no touch tone decoding with a simplex node is when 
> the node is in (the default) full duplex. Be sure you have a duplex=0 
> statement in (usually near the top) your node stanza.
>
> On Wed, Jul 11, 2018 at 11:39 AM Jay Poulos <osu49er at gmail.com 
> <mailto:osu49er at gmail.com>> wrote:
>
>     I have a simplex node setup with a Baofeng 888.  I receive ok (the
>     periodic automated date and time)  but  when I transmit a command,
>      I just hear a beep.  On the Node Status page the "Total Keyups"
>     increments each time I attempt to send a command. However,  the
>     "Total Commands Executed" remains at 0. "Total Timeouts" is also
>     0.  It's as if the command is being received but not interpreted
>     correctly?  Any ideas?
>
>     Thanks,
>
>     Jay
>
>     KI7SOX
>
>     _______________________________________________
>     App_rpt-users mailing list
>     App_rpt-users at lists.allstarlink.org
>     <mailto:App_rpt-users at lists.allstarlink.org>
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>     To unsubscribe from this list please visit
>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>     and scroll down to the bottom of the page. Enter your email
>     address and press the "Unsubscribe or edit options button"
>     You do not need a password to unsubscribe, you can do it via email
>     confirmation. If you have trouble unsubscribing, please send a
>     message to the list detailing the problem. 
>
>
>
> -- 
> Tim WD6AWP
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180718/ba62e37c/attachment.html>