[App_rpt-users] - Pi-GPIO pins COR/PTT

[Steve Zingman]

Just to be clear, ALL the channel drivers in my repo need testing. None 
of them should be considered ready to run.

Steve

On 7/19/2018 12:36 PM, Joe KD2NFC wrote:
> That is good to hear Steve.
>
>
> Joe
> Kd2nfc
>
>
>> On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman at msgstor.com 
>> <mailto:szingman at msgstor.com>> wrote:
>>
>> ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB 
>> and USBRadio could be built and replace the existing channel drivers. 
>> That was going to be my next step. I don't know what the dev team is 
>> planning.
>>
>> Steve N4IRS
>>
>> On 7/19/2018 10:22 AM, Mike wrote:
>>>
>>> I'm going to be busy for the next week (i think) but could you send 
>>> me a 'peek' at those raw channel driver files. I just want to see 
>>> what's going on in a 'study' of it.
>>>
>>> But it all sounds good and I think we are missing the ball by not 
>>> utilizing the gpio.
>>>
>>> Perhaps just needs a 'kick-start'
>>>
>>> ...mike/kb8jnm
>>>
>>>
>>> On 07/18/2018 11:46 PM, Joe Puma wrote:
>>>> these are channel drivers that enable the gpio on the raspberry pi. 
>>>> They need to be complied. I have a complier that will just compile 
>>>> the module. Maybe someone here can provide it to the OP. Would be 
>>>> great if these channel drivers can be included in regular builds of 
>>>> ASL.
>>>>
>>>> https://github.com/N4IRS/ASL_GPIO
>>>>
>>>>
>>>> Joe
>>>> kd2nfc.
>>>>
>>>>> On Jul 17, 2018, at 11:08 PM, Mike <mm at midnighteng.com 
>>>>> <mailto:mm at midnighteng.com>> wrote:
>>>>>
>>>>> Angelo, welcome aboard !
>>>>>
>>>>> The answer to your question for the net is...
>>>>>
>>>>> Outside of buying a pre-altered sound fob,
>>>>>
>>>>> There appears to be some provision out there or in the making to 
>>>>> use GPIO pins on the Pi for PTT and COR for radio/repeater
>>>>>
>>>>> so I sent this reply to the list in the hopes someone can add 
>>>>> something to that or point to some documentation.
>>>>>
>>>>> ...mike/kb8jnm
>>>>>
>>>>>
>>>>>
>>>>> On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
>>>>>> Hay Mike,
>>>>>> Thanks for the reminder.
>>>>>> I am fairly new to Allstar, and I can use all of the information 
>>>>>> I can get.
>>>>>> 73 N2DYN Angelo
>>>>>> *From:*App_rpt-users<app_rpt-users-bounces at lists.allstarlink.org>*On 
>>>>>> Behalf Of*Mike
>>>>>> *Sent:*Tuesday, July 17, 2018 6:17 PM
>>>>>> *To:*app_rpt-users at lists.allstarlink.org
>>>>>> *Subject:*[App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
>>>>>>
>>>>>> Tonight @ 8:30 edt /00:30utc - connection details www.29999.link 
>>>>>> <http://www.29999.link/>- please connect 15m early.
>>>>>>
>>>>>> ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest 
>>>>>> Speaker
>>>>>>
>>>>>> *https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html*
>>>>>>
>>>>>> ...mike/kb8jnm
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>>
>> -- 
>> Why don't I get email from Doogie telling me I should run a different 
>> version of AllStarLink?
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180719/1ff9b1e2/attachment.html>