[App_rpt-users] - Pi-GPIO pins COR/PTT

Thu Jul 19 17:27:32 UTC 2018

Ok Copy, so far with testing the ALSARadio it seems to work for me. There may have been an issue with identifying DTMF but I was doing something really experimental with a RTL-SDR and rtf_fm. 

I was planning on trying SimpleUSB and USBradio channel drivers with a USB fob and RPI gpio because I have a system thats setup like that already that I use for Packet Data and other digital modes.

Joe
Kd2nfc 

> On Jul 19, 2018, at 12:37 PM, Steve Zingman <szingman at msgstor.com> wrote:
> 
> Just to be clear, ALL the channel drivers in my repo need testing. None of them should be considered ready to run.
> 
> Steve
> 
> On 7/19/2018 12:36 PM, Joe KD2NFC wrote:
>> That is good to hear Steve. 
>> 
>> 
>> Joe
>> Kd2nfc 
>>  
>> 
>>> On Jul 19, 2018, at 10:56 AM, Steve Zingman <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>> 
>>> ALSARadio and RPiRadio could be built and added (as a test) SimpleUSB and USBRadio could be built and replace the existing channel drivers. That was going to be my next step. I don't know what the dev team is planning.
>>> 
>>> Steve N4IRS
>>> 
>>> On 7/19/2018 10:22 AM, Mike wrote:
>>>> I'm going to be busy for the next week (i think) but could you send me a 'peek' at those raw channel driver files. I just want to see what's going on in a 'study' of it.
>>>> 
>>>> But it all sounds good and I think we are missing the ball by not utilizing the gpio.
>>>> 
>>>> Perhaps just needs a 'kick-start'
>>>> ...mike/kb8jnm
>>>> 
>>>> On 07/18/2018 11:46 PM, Joe Puma wrote:
>>>>> these are channel drivers that enable the gpio on the raspberry pi. They need to be complied. I have a complier that will just compile the module. Maybe someone here can provide it to the OP. Would be great if these channel drivers can be included in regular builds of ASL. 
>>>>> 
>>>>> https://github.com/N4IRS/ASL_GPIO <https://github.com/N4IRS/ASL_GPIO>
>>>>> 
>>>>> 
>>>>> Joe
>>>>> kd2nfc.
>>>>> 
>>>>>> On Jul 17, 2018, at 11:08 PM, Mike <mm at midnighteng.com <mailto:mm at midnighteng.com>> wrote:
>>>>>> 
>>>>>> Angelo, welcome aboard !
>>>>>> The answer to your question for the net is...
>>>>>> 
>>>>>> Outside of buying a pre-altered sound fob,
>>>>>> 
>>>>>> There appears to be some provision out there or in the making to use GPIO pins on the Pi for PTT and COR for radio/repeater
>>>>>> 
>>>>>> so I sent this reply to the list in the hopes someone can add something to that or point to some documentation.
>>>>>> 
>>>>>> ...mike/kb8jnm
>>>>>> 
>>>>>> 
>>>>>> On 7/17/2018 8:03 PM, Angelo T Sonnesso wrote:
>>>>>>> Hay Mike,
>>>>>>> Thanks for the reminder.
>>>>>>> I am fairly new to Allstar, and I can use all of the information I can get.
>>>>>>>  
>>>>>>>  
>>>>>>> 73 N2DYN Angelo
>>>>>>>  
>>>>>>> From: App_rpt-users <app_rpt-users-bounces at lists.allstarlink.org> <mailto:app_rpt-users-bounces at lists.allstarlink.org> On Behalf Of Mike
>>>>>>> Sent: Tuesday, July 17, 2018 6:17 PM
>>>>>>> To: app_rpt-users at lists.allstarlink.org <mailto:app_rpt-users at lists.allstarlink.org>
>>>>>>> Subject: [App_rpt-users] *** Reminder***Net Tonight (July 17 2018)
>>>>>>>  
>>>>>>> Tonight @ 8:30 edt /00:30utc - connection details  www.29999.link <http://www.29999.link/> - please connect 15m early.
>>>>>>> 
>>>>>>> ASL Micro/Portable Nodes/Repeaters with WX8L/Sean as our Guest Speaker
>>>>>>> 
>>>>>>> https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html <https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html>
>>>>>>>  
>>>>>>> 
>>>>>>> ...mike/kb8jnm
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> 
>>> -- 
>>> Why don't I get email from Doogie telling me I should run a different version of AllStarLink? 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> 
>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>> 
>> 
>> 
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users>
>> 
>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180719/bc837f84/attachment.html>