[App_rpt-users] DSPIC33FJ128GP802 programing

[Pierre Martel]

Thnaks Mark will take a look at this.


Le lun. 23 juil. 2018 à 02:40, Mark Guibord <mark at micro-node.com> a écrit :

> Pierre,
>
>
>
> You will need the Microchip's PICkit3 In-Circuit Debugger/Programmer and
> the MPLAB IDE programming software. Both are available from MicroChip.
> https://www.microchip.com/Developmenttools/ProductDetails/PartNo/PG164130
>
>
>
> This is a very helpful Wiki that will help get started.
> https://wiki.allstarlink.org/wiki/RTCM_Client
>
>
>
> Mark Guibord
>
> Micro-Node International
>
>
>
> *From:* App_rpt-users [mailto:app_rpt-users-bounces at lists.allstarlink.org]
> *On Behalf Of *Pierre Martel
> *Sent:* Sunday, July 22, 2018 5:08 PM
> *To:* APP RPT
> *Subject:* Re: [App_rpt-users] DSPIC33FJ128GP802 programing
>
>
>
> Forgot to say that I have acces to a chipkit3 (from a friend)
>
>
>
> Le dim. 22 juil. 2018 à 20:07, Pierre Martel <petem001 at gmail.com> a
> écrit :
>
> I am building myself a few voter board and I have no clue how to program
> the pic in it.
>
>
>
> Anyone have done it and could point me in the right direction?
>
>
>
> I have some arduino uno here and some nano's
>
>
>
> RPI as well, so if they can be used to program the chip I should be ok to
> do.
>
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and
> scroll down to the bottom of the page. Enter your email address and press
> the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180723/6686620b/attachment.html>