[App_rpt-users] NanoPi

Wed Jul 25 08:38:53 UTC 2018

Hi Guys

I have tried loading  ASL_1.01-20180228-armhf-nanopi image onto a NanoPi

Seems to load fine I run the updates etc then the Menu all seems OK but
AllStar does not seem to run ?

return email:  <mailto:bob at Fot.com.au> bob at Fot.com.au

NODE=47324

REGPASS=47324:xxxxx at register.allstarlink.org               ; This must be
changed to your node number, password 

Call sign:      VK6Z

Interface type:  SimpleUSB/usb_47324  ; SimpleUSB 

Echolink Callsign: INVALID

Echolink node: 000000  ASL node used: 

Ping test to 8.8.8.8

PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.

64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=60.5 ms

64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=60.1 ms

64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=59.8 ms

64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=60.1 ms

--- 8.8.8.8 ping statistics ---

4 packets transmitted, 4 received, 0% packet loss, time 3004ms

rtt min/avg/max/mdev = 59.856/60.180/60.579/0.357 ms

Ping test to register.allstarlink.org

PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50
time=209 ms

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50
time=208 ms

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50
time=208 ms

64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50
time=287 ms

--- register.allstarlink.org ping statistics ---

4 packets transmitted, 4 received, 0% packet loss, time 3004ms

rtt min/avg/max/mdev = 208.420/228.404/287.132/33.912 ms

Ouput of ifconfig

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

        inet 192.168.168.55  netmask 255.255.255.0  broadcast
192.168.168.255

        inet6 fe80::6888:f0ff:fe2f:e5b  prefixlen 64  scopeid 0x20<link>

        ether 6a:88:f0:2f:0e:5b  txqueuelen 1000  (Ethernet)

        RX packets 2688  bytes 223583 (218.3 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 1227  bytes 325560 (317.9 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

        device interrupt 33  

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536

        inet 127.0.0.1  netmask 255.0.0.0

        inet6 ::1  prefixlen 128  scopeid 0x10<host>

        loop  txqueuelen 1000  (Local Loopback)

        RX packets 32  bytes 2608 (2.5 KiB)

        RX errors 0  dropped 0  overruns 0  frame 0

        TX packets 32  bytes 2608 (2.5 KiB)

        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

Output of lsmod grep dahdi

IAX2 registry

Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)

Asterisk version:

Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)

Current date and time: 2018-07-23.11:36

updatenodelist service running?

root       657  0.0  0.4   4428  2392 ?        Ss   11:14   0:00 /bin/bash
/usr/local/bin/rc.updatenodelist &

root      1637  0.0  0.1   3764   548 pts/0    S+   11:40   0:00 grep
updatenodelist

/tmp/rpt_extnodes-temp file

-rw-r--r-- 1 root root 0 Jul 23 11:15 /tmp/rpt_extnodes-temp

/var/lib/asterisk/rpt_extnodes file

-rwx------ 1 root root 141311 Jul 23 11:09 /var/lib/asterisk/rpt_extnodes

####### Begin warnings from messages file

####### Begin warnings from messages.1 file

journalctl –xe

Using username "repeater".

repeater at repeater's password:

_   _                   ____  _   _   _

| \ | | __ _ _ __   ___ |  _ \(_) | \ | | ___  ___

|  \| |/ _` | '_ \ / _ \| |_) | | |  \| |/ _ \/ _ \

| |\  | (_| | | | | (_) |  __/| | | |\  |  __/ (_) |

|_| \_|\__,_|_| |_|\___/|_|   |_| |_| \_|\___|\___/

Welcome to ARMBIAN 5.41 user-built Debian GNU/Linux 9 (stretch)
4.14.18-sunxi

System load:   0.00 0.02 0.00   Up time:       9 min            Local users:
2

Memory usage:  10 % of 493MB    IP:            192.168.168.54

CPU temp:      29°C

Usage of /:    10% of 15G

Last login: Mon Jul 23 10:04:18 2018 from 192.168.168.26

repeater at repeater:~$

repeater at repeater:~$ sudo -s

[sudo] password for repeater:

root at repeater:/home/repeater# journalctl -xe

-- The start-up result is done.

Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job
dev-dahdi-pseu

Jul 23 10:05:21 repeater systemd[1]: Timed out waiting for device
dev-dahdi-pseu

-- Subject: Unit dev-dahdi-pseudo.device has failed

-- Defined-By: systemd

-- Support:  <https://www.debian.org/support> https://www.debian.org/support

--

-- Unit dev-dahdi-pseudo.device has failed.

--

-- The result is timeout.

Jul 23 10:05:21 repeater systemd[1]: Dependency failed for Asterisk PBX and
tele

-- Subject: Unit asterisk.service has failed

-- Defined-By: systemd

-- Support:  <https://www.debian.org/support> https://www.debian.org/support

--

-- Unit asterisk.service has failed.

--

-- The result is dependency.

Jul 23 10:05:21 repeater systemd[1]: asterisk.service: Job
asterisk.service/star

Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job
dev-dahdi-pseu

Jul 23 10:05:21 repeater sudo[1169]: pam_unix(sudo:session): session closed
for

Jul 23 10:06:23 repeater sudo[1370]: repeater : TTY=pts/2 ;
PWD=/home/repeater ;

Jul 23 10:06:23 repeater sudo[1370]: pam_unix(sudo:session): session opened
for

lines 1316-1338/1338 (END)

Current default time zone: 'Australia/Perth'

Local time is now:      Mon Jul 23 09:35:43 AWST 2018.

Universal Time is now:  Mon Jul 23 01:35:43 UTC 2018.

grep: /etc/systemd/network/eth0.network: No such file or directory

/usr/local/sbin/net-setup: line 171: [: missing `]'

mv: cannot stat '/tmp/extensions.conf.tmp': No such file or directory

mv: cannot stat '/tmp/echolink.conf.tmp': No such file or directory

mv: cannot stat '/tmp/iax.conf.tmp': No such file or directory

mv: cannot stat '/tmp/modules.conf.tmp': No such file or directory

mv: cannot stat '/tmp/rpt.conf.tmp': No such file or directory

mv: cannot stat '/tmp/savenode.conf.tmp': No such file or directory

mv: cannot stat '/tmp/manager.conf.tmp': No such file or directory

mv: cannot stat '/tmp/usbradio.conf.tmp': No such file or directory

mv: cannot stat '/tmp/simpleusb.conf.tmp': No such file or directory

mv: cannot stat '/tmp/voter.conf.tmp': No such file or directory

Using username "repeater".

repeater at repeater's password:

Anyone got any ideas ??

73

VK6ZGN
Bob                     <mailto:Bob at Fot.com.au> Bob at Fot.com.au 
Western Australia                          Mob.
<tel:61%C2%A0%20%280%29%20418%20902%20194> 61  (0) 418 902 194 

The contents of this e-mail (including any attachments) may be 
confidential and privileged. Any unauthorised use of this document 
or it's contents is prohibited. If you have received this e-mail in 
error, please notify us immediately and erase this document 
E&OE 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180725/ba799de2/attachment.html>