[App_rpt-users] NanoPi

Wed Jul 25 09:58:08 UTC 2018

Bob,
It looks like DKMS did not rebuild DAHDI properly.

Please do as root:
dpkg-reconfigure asl-dahdi-linux-dkms
reboot

Should now be fixed. Check DAHDI is running by:
lsmod | grep dahdi

73, Steve N4IRS

On 07/25/2018 04:38 AM, Bob Good wrote:
>
> Hi Guys
>
> I have tried loading  ASL_1.01-20180228-armhf-nanopi image onto a NanoPi
>
> Seems to load fine I run the updates etc then the Menu all seems OK 
> but AllStar does not seem to run ?
>
> return email: bob at Fot.com.au <mailto:bob at Fot.com.au>
>
> NODE=47324
>
> REGPASS=47324:xxxxx at register.allstarlink.org ; This must be changed to 
> your node number, password
>
> Call sign:      VK6Z
>
> Interface type:  SimpleUSB/usb_47324  ; SimpleUSB
>
> Echolink Callsign: INVALID
>
> Echolink node: 000000  ASL node used:
>
> Ping test to 8.8.8.8
>
> PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
>
> 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=60.5 ms
>
> 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=60.1 ms
>
> 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=59.8 ms
>
> 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=60.1 ms
>
> --- 8.8.8.8 ping statistics ---
>
> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
>
> rtt min/avg/max/mdev = 59.856/60.180/60.579/0.357 ms
>
> Ping test to register.allstarlink.org
>
> PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
>
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50 
> time=209 ms
>
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50 
> time=208 ms
>
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50 
> time=208 ms
>
> 64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50 
> time=287 ms
>
> --- register.allstarlink.org ping statistics ---
>
> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
>
> rtt min/avg/max/mdev = 208.420/228.404/287.132/33.912 ms
>
> Ouput of ifconfig
>
> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>
>         inet 192.168.168.55  netmask 255.255.255.0  broadcast 
> 192.168.168.255
>
>         inet6 fe80::6888:f0ff:fe2f:e5b prefixlen 64  scopeid 0x20<link>
>
>         ether 6a:88:f0:2f:0e:5b  txqueuelen 1000  (Ethernet)
>
>         RX packets 2688  bytes 223583 (218.3 KiB)
>
>         RX errors 0  dropped 0  overruns 0 frame 0
>
>         TX packets 1227  bytes 325560 (317.9 KiB)
>
>         TX errors 0  dropped 0 overruns 0 carrier 0  collisions 0
>
>         device interrupt 33
>
> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
>
>         inet 127.0.0.1  netmask 255.0.0.0
>
>         inet6 ::1  prefixlen 128  scopeid 0x10<host>
>
>         loop  txqueuelen 1000  (Local Loopback)
>
>         RX packets 32  bytes 2608 (2.5 KiB)
>
>         RX errors 0  dropped 0  overruns 0 frame 0
>
>         TX packets 32  bytes 2608 (2.5 KiB)
>
>         TX errors 0  dropped 0 overruns 0 carrier 0  collisions 0
>
> Output of lsmod grep dahdi
>
> IAX2 registry
>
> Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
>
> Asterisk version:
>
> Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
>
> Current date and time: 2018-07-23.11:36
>
> updatenodelist service running?
>
> root       657  0.0  0.4   4428  2392 ?        Ss   11:14   0:00 
> /bin/bash /usr/local/bin/rc.updatenodelist &
>
> root      1637  0.0  0.1   3764   548 pts/0    S+   11:40   0:00 grep 
> updatenodelist
>
> /tmp/rpt_extnodes-temp file
>
> -rw-r--r-- 1 root root 0 Jul 23 11:15 /tmp/rpt_extnodes-temp
>
> /var/lib/asterisk/rpt_extnodes file
>
> -rwx------ 1 root root 141311 Jul 23 11:09 /var/lib/asterisk/rpt_extnodes
>
> ####### Begin warnings from messages file
>
> ####### Begin warnings from messages.1 file
>
> journalctl –xe
>
> Using username "repeater".
>
> repeater at repeater's password:
>
> _   _                   ____  _   _   _
>
> | \ | | __ _ _ __   ___ |  _ \(_) | \ | | ___  ___
>
> |  \| |/ _` | '_ \ / _ \| |_) | | |  \| |/ _ \/ _ \
>
> | |\  | (_| | | | | (_) |  __/| | | |\  | __/ (_) |
>
> |_| \_|\__,_|_| |_|\___/|_|   |_| |_| \_|\___|\___/
>
> Welcome to ARMBIAN 5.41 user-built Debian GNU/Linux 9 (stretch) 
> 4.14.18-sunxi
>
> System load:   0.00 0.02 0.00   Up time:       9 min            Local 
> users:   2
>
> Memory usage:  10 % of 493MB IP:            192.168.168.54
>
> CPU temp:      29°C
>
> Usage of /:    10% of 15G
>
> Last login: Mon Jul 23 10:04:18 2018 from 192.168.168.26
>
> repeater at repeater:~$
>
> repeater at repeater:~$ sudo -s
>
> [sudo] password for repeater:
>
> root at repeater:/home/repeater# journalctl -xe
>
> -- The start-up result is done.
>
> Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job 
> dev-dahdi-pseu
>
> Jul 23 10:05:21 repeater systemd[1]: Timed out waiting for device 
> dev-dahdi-pseu
>
> -- Subject: Unit dev-dahdi-pseudo.device has failed
>
> -- Defined-By: systemd
>
> -- Support: https://www.debian.org/support
>
> --
>
> -- Unit dev-dahdi-pseudo.device has failed.
>
> --
>
> -- The result is timeout.
>
> Jul 23 10:05:21 repeater systemd[1]: Dependency failed for Asterisk 
> PBX and tele
>
> -- Subject: Unit asterisk.service has failed
>
> -- Defined-By: systemd
>
> -- Support: https://www.debian.org/support
>
> --
>
> -- Unit asterisk.service has failed.
>
> --
>
> -- The result is dependency.
>
> Jul 23 10:05:21 repeater systemd[1]: asterisk.service: Job 
> asterisk.service/star
>
> Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job 
> dev-dahdi-pseu
>
> Jul 23 10:05:21 repeater sudo[1169]: pam_unix(sudo:session): session 
> closed for
>
> Jul 23 10:06:23 repeater sudo[1370]: repeater : TTY=pts/2 ; 
> PWD=/home/repeater ;
>
> Jul 23 10:06:23 repeater sudo[1370]: pam_unix(sudo:session): session 
> opened for
>
> lines 1316-1338/1338 (END)
>
> Current default time zone: 'Australia/Perth'
>
> Local time is now:      Mon Jul 23 09:35:43 AWST 2018.
>
> Universal Time is now:  Mon Jul 23 01:35:43 UTC 2018.
>
> grep: /etc/systemd/network/eth0.network: No such file or directory
>
> /usr/local/sbin/net-setup: line 171: [: missing `]'
>
> mv: cannot stat '/tmp/extensions.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/echolink.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/iax.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/modules.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/rpt.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/savenode.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/manager.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/usbradio.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/simpleusb.conf.tmp': No such file or directory
>
> mv: cannot stat '/tmp/voter.conf.tmp': No such file or directory
>
> Using username "repeater".
>
> repeater at repeater's password:
>
> Anyone got any ideas ??
>
> 73
>
> VK6ZGN
> */Bob/***Bob at Fot.com.au <mailto:Bob at Fot.com.au>
> Western Australia Mob. 61  (0) 418 902 194 
> <tel:61%C2%A0%20%280%29%20418%20902%20194>
>
> The contents of this e-mail (including any attachments) may be
> confidential and privileged. Any unauthorised use of this document
> or it's contents is prohibited. If you have received this e-mail in
> error, please notify us immediately and erase this document
> E&OE
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180725/b22e227c/attachment.html>