[App_rpt-users] NanoPi

Thu Jul 26 13:55:52 UTC 2018

JJ is correct. When the kernel was updated the new kernel no longer 
supports OSS. While waiting for JJ to publish his work around or for the 
dev team to produce a nono OSS channel driver, I'll post the info to put 
the kernel and headers on hold to keep OSS support.
I'll have the info up by tomorrow morning.

Steve N4IRS

On 7/26/2018 9:08 AM, JJC wrote:
> This is because OSS is not supported and marked as broken in current 
> Linux distributions.  You can either use a kernel that has it compiled 
> in or you can do what I did and use:
>
> ALSA
> PulseAudio
> osspd (emulates oss through pulse)
>
> I’ll write up some basic instructions for how mine is working... but 
> the net of it it is that without /dev/dsp1 your asl can’t send or 
> receive audio via  your sound card (URI)
>
> Maybe I’m talking out of turn, I did not read the entire thread back.
>
> Sent from the iRoad
>
> On Jul 26, 2018, at 07:52, Bob Good <Bob at Fot.com.au 
> <mailto:Bob at Fot.com.au>> wrote:
>
>> Hi Steve
>>
>> Thanks that worked……  However now all seems to  load and registers OK 
>> but SimpleUSB wont loa/run  ?
>>
>> return email: Bob at Fot.com.au <mailto:Bob at Fot.com.au>
>>
>> NODE=47324
>>
>> REGPASS=47324:xxxxxx at register.allstarlink.org 
>> <mailto:xxxxxx at register.allstarlink.org> ; This must be changed to 
>> your node number, password
>>
>> Call sign:  VK6ZGN
>>
>> Interface type:  SimpleUSB/usb_47324  ; SimpleUSB
>>
>> Echolink Callsign: INVALID
>>
>> Echolink node: 000000  ASL node used:
>>
>> Ping test to 8.8.8.8
>>
>> PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
>>
>> 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=77.5 ms
>>
>> 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=70.6 ms
>>
>> 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=84.1 ms
>>
>> 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=84.4 ms
>>
>> --- 8.8.8.8 ping statistics ---
>>
>> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
>>
>> rtt min/avg/max/mdev = 70.664/79.212/84.453/5.656 ms
>>
>> Ping test to register.allstarlink.org <http://register.allstarlink.org>
>>
>> PING register.allstarlink.org <http://register.allstarlink.org> 
>> (67.215.233.178) 56(84) bytes of data.
>>
>> 64 bytes from seal.lambdatel.com <http://seal.lambdatel.com> 
>> (67.215.233.178): icmp_seq=1 ttl=50 time=209 ms
>>
>> 64 bytes from seal.lambdatel.com <http://seal.lambdatel.com> 
>> (67.215.233.178): icmp_seq=2 ttl=50 time=208 ms
>>
>> 64 bytes from seal.lambdatel.com <http://seal.lambdatel.com> 
>> (67.215.233.178): icmp_seq=3 ttl=50 time=208 ms
>>
>> 64 bytes from seal.lambdatel.com <http://seal.lambdatel.com> 
>> (67.215.233.178): icmp_seq=4 ttl=50 time=208 ms
>>
>> --- register.allstarlink.org <http://register.allstarlink.org> ping 
>> statistics ---
>>
>> 4 packets transmitted, 4 received, 0% packet loss, time 3004ms
>>
>> rtt min/avg/max/mdev = 208.471/208.709/209.006/0.220 ms
>>
>> Ouput of ifconfig
>>
>> eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
>>
>> inet 192.168.168.39  netmask 255.255.255.0  broadcast 192.168.168.255
>>
>> inet6 fe80::4f:49ff:fe38:5803  prefixlen 64  scopeid 0x20<link>
>>
>> ether 02:4f:49:38:58:03  txqueuelen 1000  (Ethernet)
>>
>> RX packets 1641  bytes 149786 (146.2 KiB)
>>
>> RX errors 0  dropped 0  overruns 0  frame 0
>>
>> TX packets 1781  bytes 554581 (541.5 KiB)
>>
>> TX errors 0  dropped 0 overruns 0  carrier 0 collisions 0
>>
>> device interrupt 33
>>
>> lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
>>
>> inet 127.0.0.1  netmask 255.0.0.0
>>
>> inet6 ::1  prefixlen 128  scopeid 0x10<host>
>>
>> loop  txqueuelen 1000  (Local Loopback)
>>
>> RX packets 16  bytes 1312 (1.2 KiB)
>>
>> RX errors 0  dropped 0  overruns 0  frame 0
>>
>> TX packets 16  bytes 1312 (1.2 KiB)
>>
>> TX errors 0  dropped 0 overruns 0  carrier 0 collisions 0
>>
>> Output of lsmod grep dahdi
>>
>> dahdi 200704  28
>>
>> IAX2 registry
>>
>> Host dnsmgr  Username    Perceived             Refresh State
>>
>> 67.215.233.178:4569 Y       47324       58.178.114.94:64301        60 
>> Registered
>>
>> Asterisk version:
>>
>> Asterisk GIT Version adaec47 built by root @ odroidxu4 on a armv7l 
>> running Linux on 2018-03-07 14:53:41 UTC
>>
>> Current date and time: 2018-07-26.04:32
>>
>> updatenodelist service running?
>>
>> root 682  0.0  0.4   4428  2384 ?        Ss   04:29   0:00 /bin/bash 
>> /usr/local/bin/rc.updatenodelist &
>>
>> root 1650  0.0  0.1   3764   560 pts/2    S+   04:35   0:00 grep 
>> updatenodelist
>>
>> /tmp/rpt_extnodes-temp file
>>
>> -rw-r--r-- 1 root root 0 Jul 26 04:30 /tmp/rpt_extnodes-temp
>>
>> /var/lib/asterisk/rpt_extnodes file
>>
>> -rwx------ 1 root root 140551 Jul 26 04:26 /var/lib/asterisk/rpt_extnodes
>>
>> ####### Begin warnings from messages file
>>
>> [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Loaded parameters 
>> from simpleusb_tune_usb_47324.conf for device usb_47324 .
>>
>> [Jul 26 04:26:42] WARNING[987] chan_simpleusb.c: Unable to re-open 
>> DSP device 1 (usb_47324): No such file or directory
>>
>> [Jul 26 04:26:42] WARNING[986] chan_simpleusb.c: Unable to re-open 
>> DSP device 1 (usb_47324): No such file or directory
>>
>> And so on forever !!
>>
>> ####### Begin warnings from messages.1 file
>>
>> 73
>>
>> Bob
>>
>> VK6ZGN
>>
>> *From:*App_rpt-users 
>> [mailto:app_rpt-users-bounces at lists.allstarlink.org] *On Behalf Of 
>> *Steve Zingman
>> *Sent:* Wednesday, 25 July 2018 17:58
>> *To:* Users of Asterisk app_rpt
>> *Subject:* Re: [App_rpt-users] NanoPi
>>
>> Bob,
>> It looks like DKMS did not rebuild DAHDI properly.
>>
>> Please do as root:
>> dpkg-reconfigure asl-dahdi-linux-dkms
>> reboot
>>
>> Should now be fixed. Check DAHDI is running by:
>> lsmod | grep dahdi
>>
>> 73, Steve N4IRS
>>
>> On 07/25/2018 04:38 AM, Bob Good wrote:
>>
>>     Hi Guys
>>
>>     I have tried loading  ASL_1.01-20180228-armhf-nanopi image onto a
>>     NanoPi
>>
>>     Seems to load fine I run the updates etc then the Menu all seems
>>     OK but AllStar does not seem to run ?
>>
>>     return email: bob at Fot.com.au <mailto:bob at Fot.com.au>
>>
>>     NODE=47324
>>
>>     REGPASS=47324:xxxxx at register.allstarlink.org
>>     <mailto:REGPASS=47324:xxxxx at register.allstarlink.org> ; This must
>>     be changed to your node number, password
>>
>>     Anyone got any ideas ??
>>
>>     73
>>
>>     VK6ZGN
>>     */Bob/ * Bob at Fot.com.au <mailto:Bob at Fot.com.au>
>>     Western Australia Mob. 61  (0) 418 902 194
>>     <tel:61%C2%A0%20%280%29%20418%20902%20194>
>>
>>     The contents of this e-mail (including any attachments) may be
>>     confidential and privileged. Any unauthorised use of this document
>>     or it's contents is prohibited. If you have received this e-mail in
>>     error, please notify us immediately and erase this document
>>     E&OE
>>
>>
>>
>>
>>     _______________________________________________
>>
>>     App_rpt-users mailing list
>>
>>     App_rpt-users at lists.allstarlink.org
>>     <mailto:App_rpt-users at lists.allstarlink.org>
>>
>>     http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>>     To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users  and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>
>>     You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at lists.allstarlink.org 
>> <mailto:App_rpt-users at lists.allstarlink.org>
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users 
>> and scroll down to the bottom of the page. Enter your email address 
>> and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at lists.allstarlink.org
> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20180726/b01fc885/attachment.html>